Deposited what I can.
Sorry , I'm unemployed at the moment but gave what I could.
I feel bad cos I would give everything I could, if I could.
Deposited what I can.
Sorry , I'm unemployed at the moment but gave what I could.
I feel bad cos I would give everything I could, if I could.
Easy enough to make one. You just need to lift the anchor point of the diff upwards to the same height as the lift is. Or there abouts.
You'll need a extended bias bracket.
It pretty much moves the valve the same amount of the lift, so it's back in the original position.
Sent from my XT1068 using Tapatalk
Assuming the calipers arent seized and the brake fluid is good etc etc.
The bias valve affects the rear brakes. If the Patrol has been lifted this will affect how the bias valve works.
Sent from...
Yep Stauns maybe slower (but then again probanly no slower that having to go round and deflate each tyre one by one) and a pain in the arse to initially set up, but once done, stick em on and let...
I forgot to mention... If you're after a challenge there's some sections on the power line track which are pretty full on and would challenge a lot of well equipped vehicles and skilled drivers too.
Well some good news finally!
Came up with an idea to have no oil drain or fitting on at all and simply have the oil draining from the turbo into a funnel into the sump.
This eliminates every...
A 12 hour job that is gunna end up being an 18 hour job. I straightened the LH side by undoing all the bolts on the arm and using a hefty G clamp and 12mm thick piece of steel across the bent piece....
The wife did our last night online, we lost the pin and couldn't do it on the night. Haven't had a knock on the door.
Sent from my XT1068 using Tapatalk
X 2 yeah looks great with a slight down hill look.
Whats next after your wallet recovers lol rear 1/4 chop
or too radical??
Yep looking good mate
It didn't happen today unfortunately :(
Welcome back, nearly 5 mths between post. Lol
Bet you can't want for the 4" lift to go in.
And your choice of suspension is.............
I fear that won't happen lol but maybe someone will make a bag to put gear in ?
We do have a few female regulars Kathy that get involved but I agree, would be great for the partners of the forum to get involved with other aspects of what we love.
Having saying though, if my...
Hey folks, just thought I'd share a few pics from our camping trip to Jurien Bay & Stockyard caves, an underground river that is dry in summer. The fishing is bloody great. I'm useless with a rod so...
1st entry.......... down in Possum poachers back yard
http://i1124.photobucket.com/albums/l570/clunk71/Pemberton%20May%202014/IMG_1755_1152x768_zpsc675b9b2.jpg
and lucky last...who hasn't done this
Cool - SAND
1st Entry
http://i971.photobucket.com/albums/ae196/Bulbous1/nissanpatrol_com_au/IMG_6415_zps2ed04fa0.jpg
Edited: Whoops - Too many pics, sorry guys. I'll go with this one for now...
i have the very first shoreline ones and i was the guinea pig and mine ar good so far, done the simpson loaded up and no dramas.
U
That's bullshit, they are supposed to be the experts at this sort of thing. Hope all goes well mate...
Hope you're not paying by the hour, that stinks, hope it works out.
maybe have a search as I would think someone would have done it here.
Sucks balls big time mate, at least a good Samaritan has been able to loan you his for a wee while hey ;):D
Try Patrolapart and nissbits
All good, Timbar came round so hd a look at his, low mount just bolts onto the front of the bar using those 4 bolt holes.