Temporarily uninstalled ‘Good Old Golden Grandpa’s’ new Turbo, boxed up & express posted back to Honest Legend’s awaiting their Top-Tech-Team’s diagnosis [emoji123][emoji736][emoji120]
What I am...
Temporarily uninstalled ‘Good Old Golden Grandpa’s’ new Turbo, boxed up & express posted back to Honest Legend’s awaiting their Top-Tech-Team’s diagnosis [emoji123][emoji736][emoji120]
What I am...
Finally found (kindly alerted to nearby) and roughly test fitted a Unicorn GQ F/L OEM guard[emoji882] today after last Tasmanian site seeing adventures [emoji51][emoji23]
...
well the flange is stainless, radius mild, straight is stainless back to aluminized steel ... i tig welded it.
getting a bit more done
87879
87880
Highly rate these little hydraulic scissor platforms if needing a second set of arms working alone [emoji123][emoji123]
https://www.nissanpatrol.com.au/forums/images/imported/2024/03/33.jpg
...
Respecting our Little LB’s teenage wishes tonight in regard not wanting to GU wagon build underway crossing the Simmo this July 🥲[emoji3590]
Onwards & upwards for now, time to boogey and ready my...
I’m feeling you Tony Brother (non-sexually) [emoji22]
No doubt you’ve explored all external influences too, shit mattress, shit car seat, biological degradation, not enough exercise like old me? ...
Was invited to go camping this weekend with some friends at Greens lake. Decided to do more instead.
After spending the last few weekends under cars, we are enjoying our free weekend.
Friday...
What me made me happy today was once again working on my Gq getting it ready for Simpson trip and having phill patrolapart Christmas Hills devision to have exactly what I needed to overcome my...
dump pipe made oh boy is the welding bad, but it seals
87877
Had a good day on the tools with a bit more done on the draw system.
Made centring blocks so side to side is less force on the hold down bolts.
Made wings to fill into the tub edges.
Next up is...
Welcome to the forum, Unless PeeBee scared you off:)
I will bring this instead.87875
I am using a pneumatic one. Very handy to just pull the trigger instead of pumping a lever single-handed while under the truck. And you can replace the grease fitting on the end of the hose (I...
Yeah I did mine last week. Been on the Patrol for six years or so.
The amount of black sludge came out of mine was incredible.
After leaving it over night the sludge still in the intercooler,...
An old sacrificial tool comes in handy and saved the day lol
Sent from my iPhone using Tapatalk
87868
getting closer
87869
87866
pumps in
87867
Now my shopping trolley daily has decided to kill the alternator on my way to work on Friday morning.
For f@#ks sakes...
Sent from my Pixel 7 using Tapatalk
Thanks, mine is 1700w 1750 long and the doors determined where the bits go, I’m going to fit my coffee machine between the two doors where the gap between the fridge and drawers are, fits nicely, in...
Wide Tread Tyres - Lilydale….next door too have got me outa the shiat also Philstar, seem to be the only mob that can source obscure twactor tubes during Union/Christmas type keeping shows rolling...
I have got an electrical guy on the hook to tidy up the wiring, and by that time the trans should be done and dusted.
So a few more weeks me thinks.
87859
He has done heaps for me, old school guy, very affordable and knowledgeable.
He made up some tricky turbo pipes a while ago and nailed it!
Sent from my iPhone using Tapatalk
If pushing the lever silents the rattle, it's definitely inside the box and not clutch or clutch fork related.
I would open it to fix it instead of leaving it for later. The noise makes me feel the...
It’s not going anywhere fast, that’s for sure. But it drives alright. Slightly sluggish, but y’know, you’re not going to be trying to race anything in a car like this. The 2.8’s are the most commonly...
Shoot birds or use WD 40 or equivalent. No shit ( pun intended) works a treat for my effin gecko turds. Just wash off.