The 96 is rooted irish. Was in a bad attack and landed upside down. Smashed all top side of bike, tore most of the loom with it. Frame is bent and broken in a few spots. Forks are mangled. Motor,...
The 96 is rooted irish. Was in a bad attack and landed upside down. Smashed all top side of bike, tore most of the loom with it. Frame is bent and broken in a few spots. Forks are mangled. Motor,...
MAF cleaner is basically electrical contact cleaner
I still have cans of Dick Smith contact cleaner, and been using them to clean MAF sensors for years
Jaycar sell contact cleaner - from memory...
Certainly beats Andys gravel pit ;)
Vehicle went to the VASS engineer today and whilst the end result was the engineering certificate, it wasn't without challenge. The conversion paperwork did not list a number of items he required and...
The tb45 ones are the same so that may help you on finding one.
Can you not get it just tuned out of the equation?
Geeze mate it's getting close now.
This makes me happy, better still since it stopped raining. At a friend’s property just outside Avoca. Have just enjoyed my first cheese, chilli & charcoal jaffle.
69485
it wont help since there closed now but the boys at 4bfab did mine, maybe try find where joel is tuning these days and talk to them
Thanks mate yep I'm pretty much every few hours checking gumtree, ebay, trading post, pickles and all the auction salvage sites, grays, Facebook, Patrolapart are keeping an eye out, etc.
Have...
I've been looking at these lights for a while, and I couldn't find a lot of info about them. I eventually bought a set of these for my GU and thought I would post a quick review.
The lights...
the tb42e takes boost really well, if you want to get the turbo spooling at lower revs consider porting/polishing the cast manifold as well as a straight through 3" exhaust, i just run a straight 3"...
Well folks the young fella blew a big hole in the block of his TD42 and it appears to be a total loss.
Every time we do this I think "last time, not doing it again" then Roofy blew and it was a no...
Hi all,
Just thought I would create a new thread with my info fitting Turbo to GQ TB42E LPG in case anyone was considering it as follows:-
OK. Only have a couple of picks of Turbo bolted to...
If you do they'll put and egt socket in for nothing if you ask, and don't stress to much about the painted ones.. it all burns off the dump anyway..
I burnt mine off. Rubbed it all back and used a...
HI All,
My mission is complete.
While the I had the time, as I had to wait a day for my gasget to arrive, I reset the tappets. The info in the manual said set them to a cold setting I...
That intercooler would be fine I reckon. You need to scratch AB's brain about the front mount. He managed to FMIC his GQ.
As for engineering, give Brett and 4x4r Obsession a ring and chat with him...
id did both and no extra vibration, the tb is alot smoother than a td
If you do this I recommend only to replace the passenger side. I have both in mine and really don't like it. There is a LOT of vibration through the whole car. I will change the drivers side mount to...
do your self a favor and replace teh std mounts with superior or racebread unbreakable ones before you push on to far, or you will be replacing the lhs mount with alarming regularity
Do a burnout
>>>tappin from tassie
I think playtime are in Melbourne if you are wanting a budget one
I’m not 100% certain, but I think it’s nominally 2¼”.
Here's a starter then... Dusk from 29,000ft.
http://i935.photobucket.com/albums/ad197/BenKDJ/Sunset-0001_zpsnliwsfgr.jpg
Yeah indecent exposure fines ain't cheap!
That alright, I wouldn't be worried about that