Search:

Reviewed by moderators, AB to include mother in law to sweeten the deal.

Boost on Patrol ZD30 is computer controlled and under certain conditions the computer will reduce boost to allow the EGR to work, this has the effect of reducing power and sooting up your engine...

What size hose to fit the PCV filter?

We'll let you off with a warning if you post a pic of the Prado being recovered by a Patrol.

I don't know why your wiring has been bodgied up like that but have a very close look at the condition of your fuse box as per the photos in this thread;...

It's the rear leaf sprung utes that have the narrower rear track, same as leaf sprung Landcruiser ute has narrower rear track. I believe they are made that way as there is a limit to how far the...

I'd be looking at TF ('97 - '03) Rodeo, they're in your price range in 4WD dual cab diesel configuration, very reliable, and being factory turbo will perform much better than the N/A Navaras.

Great Wall..............to keep the rabbits out!

They are a proper locker vacuum operated as Winnie suggested, made by Macnamara I believe.

The gearbox behind the RB30 is a very strong box, I believe the gearset is very similar if not the same as R32 GTR. I've seen many threads written by people who have fitted RB25/30 turbo engines in...

I'm a big fan of Aussie made Kings springs, I've put them in 3 of my Nissan 4X4's and currently have a set in my work van which have done over 200,000km.

While I dont know what the actual fuel consumption figures are, keep in mind the 4.8 has a much more advanced twin cam 24 valve cylinder head and I think also variable cam timing, so should be more...

Welcome back mate.

I use a steel pin punch and hammer to get them out, the bearings are hardend steel so you won't hurt them. Just keep alternating where you tap on the bearing so it comes out evenly, same fitting the...

Please be considerate of other drivers and aim your headlights down after fitting HID. I do a lot of night driving and I'm tired of being blinded by inconsiderate pricks who have illegally fitted...

Did you replace the brake shoes with the drums and cylinders? You may need to bed the shoes into the new drums before you get a good pedal. It's also possible there may still be some air trapped in...

I've only ever used the Provent 200 and would recommend it highly.

Engaging the front hubs occasionally and going for a drive is a good idea, it keeps everything in the front end moving and lubricated.

6" lift had to be compensating for something ;)

Being GU this is the style of hub nut tool you need;...

You might find this thread useful; http://www.nissanpatrol.com.au/forums/showthread.php?2067-How-do-i-change-a-gu-cv&highlight=wheel+bearings

http://www.gumtree.com.au/s-ad/upper-coomera/other-parts-accessories/warn-winch/1024503525

BA falcon 6 cylinder would be cheaper than LS1, but a lot less fun. Either way a lot of $$$ just to run a serpantine belt.

It's cheaper and easier to put a switch in the switching side earth wire.

Yes they are the same.