Search:

I've just put turbo on mine.
I bought a 2nd hand sump...$60,welded the fitting on then swapped it straight over then sold my sump for $60.
So it cost me $35 for new gasket.
It's an easy job just...

Easy, just a heap of 10mm bolts and then drops down.

Sent from my GT-I9506 using Tapatalk

Remember watching yours get done was like watching a lobotomy bring performed . . . Bit scary does work but, if you know what your doing [emoji6] . . .

Sent from my GT-I9506 using Tapatalk

People have done it and it works but I wouldn't personally.

Assume this is this going on a GQ?

You really want the oil to drain away from the turbo as fast as possible direct to the sump, hence...

I would be putting a damper back on. First.... Lol.

I would say do the things that cost nothing first

not having a steering damper may not be the issue though, because they do also have the ability to mask the issue.

to check the wheel bearings, jack up the front end, place your hands in the 6...

Yeah not having a damper on wouldn't be helping. My issue was wheel bearings. I wasn't doing them up just that tight enough, eventually I had to change the stub axles where the wheel bearing run as...

Not having a steering damper would do it for sure, did it do it when one was in there. Had a sierra that had crazy death wobbles put a on a new dampner and fixed it.

Yeah mine was king pins full of mud... Wheel bearings is common. I've also had the pan hard rod nut come loose after some lazy so n so must of forgot after a wheel alignment

Sent from my SM-G930F...

G'day Jacob,
I've only ever experienced lightish annoying wobbles on our Trols over the years and were simply wheel balances/alignments required. I believe matfew and mudski found their death...

G'day Jacob, welcome aboard mate...................... you poor poor bloke

Welcome to the forum mate, feel free to ask any questions.

Good to see ya here....heaps of info..

Sent from my SM-G900I using Tapatalk

Welcome aboard Jacob !
You're gonna need more than mechanical advice being mates with Avo ;-)
It's a great forum, plenty of really knowledgable blokes on here and some great laughs too, enjoy mate...

G'day mate welcome aboard, sorry to hear you have Avo as an associate