Search:

Great day today NP family, we are back for good!

Long story short it has been quite a stressful 24 hours for myself lol

Someone complained about us (I can't go into too much details here) and...

Of course you can. Not sure why priming is a hassle though. Not like its hard to do. Takes a whole 20-30 pumps and its done.

OK now for the wheel bearings.

So you had to strip out the inner race from inside the Disk. Yes its a bugger of a job and a Brass Drift is your friend. I have used the old race to make a new...

You can get the required parts from "nizbits" a vendor on this forum.
Cheers, the ferret.

Oh thank god I thought I was the only one on the forum, I'm in for sure. Pm me to send me all the details ;)

Hey Benno, do you need to replace the whole assembly or just the mast?
If its just a mast you should be able to just remove the chrome nut at the base of the aerial mast and use the motor to drive...

More pics, I will have to work out how to align the pics with the text!

I have seen some junk used on safety chains, including alloy Karabiners from the $2 shop.

This move also puts a question mark over the use of a padlock alone, instead of a shackle

Thanks for...

SA Police have now confirmed that it is a legal
requirement nationwide and it’s the driver’s
responsibility to ensure compliance

Australian Design Rules and the Vehicle Standards Bulletin
...

Hey all

I have noticed lately there have been a few posts about smoke from diesels etc the colours and all that and what it means so i thought i would post up this link to help all those looking...

just did mine today same problem as yours , i had new bearings done and all the seals too also new tyres and a balance in the last week and the local mechanic wanted to pull it apart and do some...

I get a nice little shimmer at 85... tried wheel balance, rotation.... nothing will fix it... except ... I jutst drive at 80 or 90... no problem...

Mick

first check panhard rod bushes ... get someone to push the car sideways while you watch for any movement.
second is wheel bearings ... jack a wheel up and grab it top and bottom then check for any...

Ok i see so many posts about steering shakes and wobbles i thought i would try and keep it in one so that it isn't all over the place.
Feel free to add anything i have missed.
Ok things that worked...

As above, but if all seems to be in order. The one thing alot of people don't do on patrols is give them a sideways shake. Get your mate to grab the bullbar and push it sideways then pull back, get a...

Hi jman
Start with wheel bearing adjustment. Most wheel aligners don't bother adjusting this on 4wds as it takes too long ( & care needs to be taken with locating f/wheel hub on...

My mate made this and put it on facebook. Thought it was worth posting here. Made me laugh.

http://www.youtube.com/watch?feature=player_embedded&v=jlQMOaB_BP8

G'day mate welcome back

If it is your intention to only post the minimum 25 posts to get access to the manuals please be aware that you are being watched, and the minimum standard we will allow is a decent introduction...

THE 25 POST RULE


We the forum Management are sorry to hear that there are still ppl out there who are coming to grief over our 25 post rule. Its not our intention to course anyone any grief by...

Ok jus got around to doing the hot start fix found it was really easy took around 20min to do and that was with taking pics so should take around 10min have uploaded some pics of the job this is how...

The manuals on here are provided by the members and are free to download.

You need to make 1 post to get the manual.

We used to have the manuals available for anyone with no restrictions but...

Free download of our first Nissan Patrol magazine (November Issue).

As time prevails these magazines will get bigger and better. Any feedback or ideas are welcome for the next issues!

NOTE:...

I was working in the USA for the past 5 years and I have just returned home. I would like to share some of the photos I took in the western deserts. Not sure about the expected result but maybe I...

Someone may be asking this one day so thought I would put it on the forum for reference.

Nissan Patrol models and date of manufacturing.

Make: Nissan Patrol
Model: GU Mk2 Patrol
...