I have an awning, a roof rack and a winch and they haven't failed me yet.
I know the risks, I maintain em and I use em.
And those three purchases saved me and my family about 2500 bucks as...
I have an awning, a roof rack and a winch and they haven't failed me yet.
I know the risks, I maintain em and I use em.
And those three purchases saved me and my family about 2500 bucks as...
The thing that annoys me is that the SAME products, built in Australia- exported to America and the sold via amazon/ eBay back to bloody Australians....can be Cheaper to purchase from overseas and be...
Tigerz Grande 12000. Used about 20-30 times in twelve months,mostly at Glasshouse in some deep mud, also on the beach at Bribie and on the Bribie inland dtrack.
Hauled our fat GU and camper trailer...
3 pics off a mates facebook page....despite the pics, there was no real way around this clay once in the creek line.
In the first pic, bottom left corner are the ruts my wagon was hung up in...going...
MCC mate, the same as the Powerful bar from what I saw when I was looking.
I just got back, left early cos kids had had enough.
Great drive, but of water about but nothing to bad, chicken tracks always help.
The guys were heading into the wettest part when I pulled out ....
Been a while with the updates, busy as normal with the kids and work.
To start off...I hope the photos work, internet is stuffed after recent storms in Brisvegas, and I cant work bloody I Tunes at...
Put in some decent cup holders, courtesy of Bunnings and the Internet.
8 bucks, a heat gun and some Triple M trim Paint.
No more dropping brews on the gear boot and carpet.
Should have done it...
Fitted a remote keyless entry system and a new door solenoid, tidied up all the originally crappy wiring under the dash.
Pressed the lock/ unlock buttons 900 times...just to make sure it worked.
Any pictures or more info mate?
the one thing I have always actually payed for (cos I can never be sure I have got all the old coolant out)...is to get some HOT water back-flushed through the system...
Mate, that looks sweet!
Top effort and hope it all works well for you, great build
Chinavasion.com http://www.chinavasion.com/ .....awesome service, great price.
Have one in the family wagon and another in the shed waiting to go in the Patrol, with roof moounted DVD screen and...
Yeah, my understanding is that constant sun exposure will fade and weaken the rope.
Might be bad in a top-mount set-up, but in a low-mount bar install it should be ok, its pretty well hidden under...
Gday Tonks,
the bar already had a pretty large cut-out in the top of it, I wanted to recess the controlbox inside but leave the remote-plug accessible above the bar.
There are two long, thin bolts...
Nice looking rig mate...bet the cash card is still smoking:smiley_thumbs_up:
Installed mine yesterday,only took about 45 minutes it was pretty easy. Heaps of room inside the bullbar.
I am yet to mount the controlbox though, its currently sitting inside the bullbar top...
G'day Tuck that's exactly what I do every service. Unscrew the mounting bolts and simply spray the MAF specific cleaner up into the sensor without disassembling it. Pulled one apart on a ford once...
Do they retract better? Is it a failure of the Nissan return springs ot a pillar design fault?
Don't get me wrong....325 bucks is bugger all for seatbelts that work properly.....just annoyed OEM...
Ten minutes on Google gave me this website.....
http://www.depoautolamp.com/depo_pro_qry_brand_front.asp?pageno=3&category=Performance&brand=NISSAN&make=&cat_no=&oem_no=
the first picture is...
Ooops....forgot about that!
Gotta get ya laughs in,while the kids are small! I KNOW payback will be a biatch......!
Disclaimer..."No children or animals were injured or harmed during the...
Mate I have the rear corners, the alloy rear step and the two inner corner brackets off our 99 2.8 GU? The lights still function, however I cut the loom to use the plugs on the steel bar, so a bit...
Just had a play with the "click a part" section....dunno how much time you devoted to it AB, but is pretty darn good.
Love the clickable vehicle pics....awesome job.
How about you shout yourself...
Awesome pics........gotta love Glasshouse!
Haha like it...is that brake/ tail switched?
Or a switched fog light?
Nothing wrong with thinking outside the box.
Slip the light off, pass it and wiring through the rim and easy access to the...
I think these photos look sort-of similar...but there isn't a SiNGLE stud left on the red Patrol.
And yes, thats hub is till attached to the axles and suspension....even after being dragged about...