Ok lets see how close I can get to a step by step from memory!
1. Jack up front end and put on jackstands
2. Remove wheelnuts and wheel
3. Remove Auto/manual locking hub
4. With circlip pliars...
Ok lets see how close I can get to a step by step from memory!
1. Jack up front end and put on jackstands
2. Remove wheelnuts and wheel
3. Remove Auto/manual locking hub
4. With circlip pliars...
Mate it is not hard you just need to lay everything out in the order in which it goes.. you need CV grease plus High temp bearing grease.
The axle seal is the hard one to get out and care is...