I have a safari snorkel and have the same gap there mate...
I have a safari snorkel and have the same gap there mate...
I have neg 13's on 315's and the tyres sit flush with the guards.
I wouldn't think you would need bump stop extension on a 2inch lift. (others feel free to correct me) I just installed a 3inch flexy kit and even then some were saying its borderline if I needed them...
I'm running 305's on my GU8 with neg 13 offset rims with a 2" lift and tyre sit borderline of the guard.
I remember a few guys did have 35's with a 2" lift but have all gone to a larger lift now...
Anything more than a 2" lift will require extended bump stops.
Unless you feel like new shocks after each run..
Ok another subject I don't write about much due to the very odd ideas so many people have and seem to be a expert with but have no real idea of the maths or the dynamics or the science and...
I Will have a go at this for you robo. Firstly You cannot get torque without Kw's but from my perspective it isn't very hard to get 150 rwkw and 600nm this seems to be the figure that makes the 3 ton...