Search:

Will take some next week when home, in Singapore for GP atm.

Top stuff Tony! Can you show us some more recent pics mate?

Swapped out the stretched belt, swapped the 110amp alternator back to the 300amp unit, drilling down into the interchiller issue, not looking that easy to fix, TX valve related it seems as all the...

Have done it twice now, dead zero, battery chargers wont even look at them. Car alternator/jumo start the only way forward when it gets to that level. Anyway the new buzzer should suffice until my...

I agree Marko you’ve got an awesome GU TD42 wagon plus fantastic accessories. But I’m going to be devil’s advocate and ask why you want to chop the back off? Any GU wagon can be a touring legend....

The studs go in very easily when they are lubricated. The lubricant does not negatively affect the interference fit, but you really don't need to do a freeze shrink fit. I initially seated the studs...

OK, decided to swap all the studs out on the basis they were all installed by the same method that resulted in the first wheel failure. Started at 8am, finished at 4pm, nice and easy, just...

OK, I found a source that gives a seating torque from a rattle gun at 210nm for an M12 x 1.25P wheel stud. I have trawled thru my text books and found the method to calculate the torque, finally,...

Out with the old light bar….
https://uploads.tapatalk-cdn.com/20240914/1311b55c8e7a0e1efdac71ad0d6e1f2e.jpg

In with the new....

Definitely 60 degree taper on the Y61 17" factory alloys, and the handbook for my 2015 GU Y61 wagon states 97 ft/lbs tension. I do a recheck after a few hundred ks, and also re-do the tension anytime...

So I bought a new reverse light from Paul Lights just fitted it and Ho Lee Chit. Bright!
https://uploads.tapatalk-cdn.com/20240913/009a1de7dc83b2c8bcfaab5af623db38.jpg

...

Plassy I will have the wheels off tomorrow. The GU4 alloys have a tapered seat, the Y60 alloys have a flat end piece and require the flat nut. Funny enough when I was picking up 'my nuts' off the...

Picked up new studs today and a full set of wheel nuts. According to PAP the drv side rear wheel is a known culprit - would really like to understand this. I know since putting in the new motor the...

Hello! This is my workhorse. There are some questions about the Y60 manual8828888289

I finally finished the dual carrier. I don’t think I’ll have issues. The rear bracing is wee heavy but we’ll see in two weeks when I head up to QLD then across into Innamincka and then south....