Search:

I haven't bought a kit from ebay, 'cos i get a better deal from local spare parts shop(Burson), and if there're any issues you can return the unused item. Judging from the ebay pictures, I suspected...

A combination of extended rotor button, pertonix ignition and points do help.

Have you changed the condenser and coil, as these have been know to cause missfire.

you have done the rest

The...

That's right folks, we finally have Issue 2 of the famous NissanPatrol.com.au magazine hot off the press below!

I cannot believe It's been two months since Issue 1, how time flies!

I would like...

I have read alot seems very common driver side only,maybe due to battery acid with the mud etc,i will hit it with wire wheel and rust converter some paint,Will leave them hats off i think.

tb42 and rb30 carbys are basically the same.

The rb30 is known for running out of fuel on step hills, I have not experianced this on the tb42

Thanks guys for your input, the problem is solved. Woohoo!

I had gone through all the difficult stuff only to find that it was simply a poor connection at the Positive terminal on the battery, one...

Just finished doing an axle seal on the rear left and job was completed in less the 30 min.
You only need a 19mm spanner for the calipers and and 17mm for the housing and a large Phillips head for...

Gday welcome aboard mate

Welcome to the forum mate, feel free to ask any questions.

Welcome to the forum mate.

G'day mate welcome to the forum.

Welcome to the forum mate... Where are you from?

Welcome to the forum mate.

Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information. ...

Welcome to the forum mate.

Hello Fox7 and welcome to the Forum,
jump in anytime and enjoy, if funds allow go the GU

If you are doing servicing by the book, then 320,000 should theoretically be the big one .. all fluids, re-pack bearings and swivel hubs, etc

If you haven't been doing this, and you have been...

Hi,

I have been searching for the TB42e wiring details.

i found this manual - has all the gq motors - including the TB42e ECU details - (see page 108 onward)

Its not in English, but the...

Hello all.
I'm dead keen on tidying up the electricals under the bonnet of my '97 TB42e GQ and restoring a bit of order. What I'm looking for is clever ways of mounting fuse boxes etc in the engine...

Bias Bracket is on top of the rear diff which connects to a spring which connects to the load L.S.V ( Load Sensing Valve ), the info below my pics is for a GU but is same on the GQ's

DISCLAIMER:...

Menace,

it is actually a brake proportioning vavle which is attached to the rear diff, with a spring to the body.

This valve is a load sensing valve where as you load the truck up with gear,...

Guys I just noticed the front disc are starting to fracture.So looks like i'll be doing brakes next.So as there's a few sorts do I stick with the old style or go for drilled and grooved discs.Why do...

This Training manual is NOT Patrol specific

http://www.nissanpatrol.com.au/Eng-Trouble-Diag-Aug-09.pdf

File Size: 4.83MB

Let's go...

http://imageshack.us/a/img99/9008/hpim2149a.jpg
http://imageshack.us/a/img402/6239/hpim2150a.jpg
http://imageshack.us/a/img210/9456/19082012506.jpg...

Hey guys I embarked on replacing the front crank shaft seal in my Auto TB42E over the weekend and it was a reasonable job. Following instructions from the other Patrol forum (an old thread from...