One word. JESUS! 81015
Sent from my iPhone using Tapatalk
One word. JESUS! 81015
Sent from my iPhone using Tapatalk
Welcome to the forum mate and feel free to ask any questions.
Sent from my iPhone using Tapatalk
Welcome back to the forum mate
Short answer YES...
I've been a tyre fitter for 19 years, that's a basic repair. Just ask for a radial patch to be bonded to the inside of the tyre
Barnett showed his colours when he used cops as an ‘army’ to push his & Woodside’s agenda against his constituents up at James Price Point. Just seeing his bloated, gloating & smarmy face makes me...
I prob should post this in "what made me angry" but it is just so incredibly ferkin stupid that it deserves a thread of it's own.
WA has had enormous surplus budgets for 15 years.
They have...
Nice rig mate, thanks for the pics.
I fitted the needle valve from Northern 4x4 yesterday afternoon. After some testing and tuning I have the engine running very nicely indeed. At around 100kph the boost sits between 11-12 psi and...
Don't think about it mate, do it
The vacuum solenoid on the patrols is a two stage set up, three ports. It controls boost and spool up rate, one port for vacuum supply, the other two for max boost and spool up rate, if you want to...
Go for a good drive without the shield, let the turbo really warm up. Then pop your bonnet, the heat coming off it, will make your refit the guard quick smart. They are there for a reason. ANd...
The turbo heat shield makes a huge difference on heat and would think it should be fitted. I tried mine with out it fitted after putting a new exhaust on and the heat coming of the turbo was a lot,...
when my 3'' exhaust was fitted the guard was not refitted or returned.