Search:

Maybe mimic a Y62 with some stickers "Hiiiiii, I'm Dazzy Sparkles from Butchy NP forum", of course with your MB moniker.

Great to see another convert to focusing on hydration.

Look great Mark. My crossing of the Simpson was with mud terrains and I didnt get any further in the goop on the Strezleki than the guy with all terrains in all honesty, sticky power sapping muck, no...

OK, good point, all other gears are fine, BD reckons the box only had 40,00 on it when the conversion was done so its now maybe 45,000 old. Or its another BD bullshit story and the box had 8 Million...

I have noticed that the 5th gear selection is at times notchy and am wondering if the bush in the top of th box is the culprit. Has anyone replaced the two plastic elements, how easy/time involved,...

Thanks Stropp, spent another big day on the barge, stuffing around and doing things once properly, 240V system now installed, double Makita 18V battery charger installed, on board Victron 240V...

More or less finished the POD electrics today, debating whether I stick with the breaker panel or just run have short extension leads instead to the other side of the POD - bit extravagant with the...

Wife flew to China today with one of my daughter to look at old pots or something, wasnt really listening, anyway cracked on with the sliders today between meetings and dealing with retards, made...

They are a very sexy looking bar. From my days working at Kaymar Eng, the requirment was to have the supplementary lights to cater for an 45 deg viewing block of the factory indicator/stop assy. It...

Yep, I get it, but NO, leave it as it is if you want the pump and pressure would be my recommendation.

I would run a pressure regulator limited to no more than 5psi. Anything more and the tank could split. Running pressure in a plastic tank is asking for problems.

Yep, but the increase in pressure only needs to be a poofteenth to generate massive velocity out the nozzle ( 5PSI across the total area of the tank is a massive discharge force.). What I dont like...

Dr Google says fires ok at Dalhousie outside of Nov to March due to fire hazard and must in permanent fire pits

John, I assume the tank has a breather in the cap? If not it will suck in and stock flowing with either a pump or gravity. A small hole , say 3- 5mm dia would be fine, you could screw in a pneumatic...

Good outcome, however I think you would achieve the same flow just letting the water run out the hose. Anyway its installed and working

Today I sorted out a coolant leak behind the S/C manifold, bloody utilux clips and such a range of clamps that do and don't tighten adequately. Ran the cables for the solar panels thru the pod wall,...

OK guys, I agree the platform has had some issues lately, all good, could not make sense of it after a full day in the Zoo with the primates.

Finally connected the electrical feed to the bank of lithium's in the pod, turned on the 10Kw inverter and plugged in the 240V 15amp lunchbox welder, ran it at 100amps for about 3 mins continuous and...

Here is the image I have tried to attach 2 Million times 88064

Crap it works now, or great work!

This is the new tapping wrench above the older 'still in service heavy duty wrench I made in the...

This brute arrived today. The original surviving HD tapping wrench is at the bottom. I like the extra leverage and everything is so much bigger and gruntier.
88037

Update is the supplier is not the owner of the problem, they cant supply any service if they dont have the order number and thats even when OI supply the copy of their model number and serial nuber...

The forum fired up fine this morning on my laptop pc.

Update on the Codan 'death Bracket', now modified.
88034

Getting database error on desktop but iPad opens up fine @AB

If they will supply a replacement, I am happy to pick it up and post it to you, only 20 mins from me, not a problem.