Search:

Not sure if this will be of much help but this is a picture of mine before putting the bar back on..
47981

My dog posing as the sunsets over the mountains in Canada. She really loves to pose!
47879

Truck is looking awesome mate! Very jealous

Okay time for an update...after 3 months of sanding, spraying, wet sanding, more sanding during every bit of my spare time I have finally finished doing my shorty! I have put up a couple of pictures...

2nd entry
Another alpine lake but this time on the other side of the world, this one is Lake Marian in Fiordland NZ
45325

cheers for the votes last month guys. This is my first entry, taken in Canada at an alpine lake with a glacier in the background
45220

Got a 2nd entry which I took about a month ago on the west coast of the south island here in NZ
44426

One I took this morning. Nice to see some snow on the mountains
44423

Is the clarion convertor still there? I'm pretty sure that the speedo is 24v but the temp and oil are both 12v as is the clock. If you can find them there should be a couple of light blue wires one...

Nope no need for resistors just replace the standard ones with led style ones and away you go. This is the ones I got obviously they are 24v because I have a safari but you can get 12v ones too...

You can buy bayonet led bulbs that just fit in place of the standard ones

Very nice job mate looks awesome

Nice work mate I will be delighted if mine turns out looking that good!

You guys are awesome! Got it sorted tonight bit embarrassing to say because I'm an electrician but it was actually the fuse that was gone in the module. Once that was sorted I played around with the...

Well started stripping the paint off the truck to respray it. Man its tough sanding a whole day today and theres still so much to do! Doesn't help that there are so many coats of paint on it already...

Nice work! You've inspired me I already started stripping the paint on mine today. Gonna strip it right back to the metal and build it back up. Got all the gear on order too just need to get the...

I can't wait to see this when it's done. What gear are you using to paint it? This is the next big job that I plan to do

Hi mate awesome thread I love it! Bit further back in the post but where did you get your exhaust from?

Thanks! It wasn't too difficult just have to pull it really tight and I just reused the clips that were holding the original covering together and then just had a small crease each corner as I...

There may be enough room behind the aircon/heater controls so you could potentially move it all down it may be a bit of a mission though I have tried to crop a photo of the area from when I had my...

Hey guys I've been steadily working away at redoing the interior of my 1990 Safari and thought I'd put up some pictures of what I've been doing so far. I started by taking the dash out (which was...

Awesome thanks guys I will see if it's repairable

Mine is just a SWB just the same as the patrol but 24v

I think it was the circuit board on the back because as soon as I replaced it with the new one it worked straight away and then all of a sudden it stopped and so did the odo and trip as well

I put my multimeter on it and the yellow/red wire which I believe is the incoming wire was 24v