That is above and beyond what I would have expected from any company. Aussie company's should take note of what real customer service looks like.
That is above and beyond what I would have expected from any company. Aussie company's should take note of what real customer service looks like.
Dyno run would have been nice, Just don't have time at the moment.
At least we have a solution for other owners of the later 4.8, with 4 O2 sensors
Exhaust system is fitted, quite easy to do, everything fitted up perfectly and looks to be very well made.
Driven about 300km so far, no warning lights, a bit more responsive and overtaking seems a...
I had a similar problem with my winch, I just removed the plug and made it wireless, with a cheap ebay kit, works great.
My factory original radiator, top tank split,a couple of days ago, 140km from Longreach, had to make a temporary repair, then drive very carefully to Longreach, still waiting for an other radiator...
HI, I am going to fit my Redarc oil pressure gauge on the weekend, the sender for the gauge has a 1/8 npt thread, is that the same as the sender in the 4.8?
I have just put a set of Dynamics on mine, very happy so far.
If you are going to use your vehicle offroad much, don't go up in diameter with your rims, like MB said, you wont have much tyre to work...
I always carry a leatherman wave with me, when travelling, so handy.
Late last year I bought a 2010 4.8 Patrol, I was going to do a diesel conversion, but after having it for a while, I am not so sure I want to anymore.
yes it does use more fuel, but not that much...
I just bought the Carbon winch, haven't used it yet, seems really well made though.
The winch comes with an extended breather, just like a diff breather, should help keep water out, and it is a lot...
I think the 6bt is probably to heavy, I should have stated in my original post, I was thinking about the 4.5L common rail motor.
Just found this thread, I have had the Toyo MTs and now the RTs.
The MTs worked very well for me, this time I went for the RTs, to try something different, and I don't seem to be finding as much mud...
I couldn't stand driving it with a bubbling dash for very long
Check Total tools, they also sell the gas bottles
Happy Birthday Mudski, all the best.
I just used a speedo app on my phone to work out how far out my speedo is at the speeds I normally travel at, now I just adjust my speed to suite and no longer need a speedo app or HUD.
Happy birthday Mark, have a great day.
It was $530 for labour, I supplied the Atoc tower brace kit, but it will depend on how bent or damaged the spring towers are.
Mine was the first one they have done, so I let them have it over night,...
I ended up getting the weld on tower braces done at Edge Automotive in Howit street Ballarat, after a 4000km trip through outback NSW an SA, with the Patrol loaded up and towing a camper, no further...
68517
New dating rules
The Atoc weld in kit, which is what I want to use, does not need the body to be lifted.
I would have used one of the bolt on kits, and install them myself, but my spring towers have started to...
I don't think its going to blow, could be limp mode, try cleaning the maf sensor, don't touch the wire with anything and use maf sensor cleaner or electrical contact cleaner.
I thought you where talking about that other weed.
Your welcome, the dripper tube looks good, but if it doesn't last there is a guy on ebay that sells silicone air box seals, that's what I have on mine and it works very well.
Flip your air box lid over and check that the seal is not broken or hard.