Yendor
Banned

Dave 0407532232. Text me & I'll call you back from under the truck if I can't find it.

indicators



Sorry guys need a quick answer has the gu st 1999 got a flash can or a relay for the indicators I'm out of time and I have no indicators or dash indication . tried standing on my head to look but all I saw was a relay on the left hand side of the column .I'm in a rush because am leaving for alice in the morning and only noticed on the way home; Dads crook in alice and the young fella wrote off his brand new 3lr patrol on the weekend and have been dealing with insurance etc 4000ks why does life flog you sometimes are well the pendulum must swing the other way sometimes sorry about the whinge. Sorry yendor am in a hole at the moment the fuse in the cab is good so I'm leening to the flsh can/relay as the problem any help would be good I posted on general gu so if you can please leave a message on there as am a bit rattled at the moment.cheers dad

Hi Rodney, Quick question, there are two terminals one large and one small on the Lucas 12v genny I have picked up.
It was working on the car. what terminal do I use for power outlet once the thing is earthed?
Where would I find info on how to hook up a regulator? and will I need a rectifier to prevent the genny running as a motor once the battery is full?
I can send you a pic, but I'm sure you would have worked on these thousands of times.
Cheers, Rod.

Rodney, Hi Mate, Brain pick on the way lol
Ok, wanna build a wind powered gen set, to charge a couple of N70 Z's, to power the workshop lights (leds)
Altenator is too hard to turn so want to use an old Lucas generator off say a hillman or holden etc.
I know I will need a reg and a wind pressure on/off switch and a swivel with brushes to suit wind direction.
I also know the output would be around 15amps, but where I live is plenty windy and could charge all night ready for work tomorrow.
If I can set it up, I would possibly post it on the forums as a DIY and maybe sell a few.

Rodney, Hi Mate, Brain pick on the way lol
Ok, wanna build a wind powered gen set, to charge a couple of N70 Z's, to power the workshop lights (leds)
Altenator is too hard to turn so want to use an old Lucas generator off say a hillman or holden etc.
I know I will need a reg and a wind pressure on/off switch and a swivel with brushes to suit wind direction.
I also know the output would be around 15amps, but where I live is plenty windy and could charge all night ready for work tomorrow.
If I can set it up, I would possibly post it on the forums as a DIY and maybe sell a few.

Hi

Yendor mate ill find me papper work on those mags when i get back from work next week and let you know asap please send me yor email adress
and ill send a copy of the papper work to you stating all the info of the mags and tyers for you mate hope you were happy with them.....