View Full Version : Trans temp gauge on 2010 CRD auto
TheFlyingBadger
22nd March 2012, 04:18 AM
I've just got a oil temp gauge so I can keep an eye on the trans temp - any ideas on the best spot to put the sender?
Maxhead
22nd March 2012, 06:07 AM
I've just got a oil temp gauge so I can keep an eye on the trans temp - any ideas on the best spot to put the sender?
I thought these alteady had a sensor in them....I coulld be wrong but I'll double check
TheFlyingBadger
22nd March 2012, 07:29 AM
I thought these alteady had a sensor in them....I coulld be wrong but I'll double check
Ta Pat. I cant even look to see what's there at the minute, I'm away from home for a while....
Maxhead
22nd March 2012, 08:18 AM
OK, This might help. Pages from the manual. You could tap into the sensor circuit and should be able to display temps with a gauge. I have tried thin on a scan gauge without any luck but I'm pretty dumb when it comes to programming TXD/RXF/MTH...bla,bla, bla...LOLOL
13979
13980
13981
13982
13983
Chaz
23rd March 2012, 08:18 PM
You should be able to get a trans temp reading from a good OBD reader. I get it from Nissan Scantech on my car pc, but I have a non OBD Di Patrol.
That way you'll be reading what the TCU sees.
TheFlyingBadger
23rd March 2012, 09:19 PM
I've not managed to get it on the scanguage, nor has anyone else I've seen on t'interweb. Out of interest, what sort of range of temps are you seeing?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.