PDA

View Full Version : MaZ's Truck



Mazodude
3rd November 2011, 07:32 PM
Hey guys.
Been on here a little while now and thought I would show off my truck as it is now :D

"GUNTER"

It's a 1993 GQ 6cyl 4.2L Diesel :D
when I bought it, came with a warn winch and 2 uhf
Before:http://img856.imageshack.us/img856/990/img20110813124933.jpg

Now:http://img232.imageshack.us/img232/1816/photo4el.jpg

So far installed:
2" EFS Suspension lift
16"x10 black sunraiser rims -22 offset
5x 33" Mickey Thompson MTZ (285/75/R16)
100w halogen spot and spread light.
Safari Snorkel

Should be building a set of drawers for it soon.
Maybe rear air locker as well :D

Clunk
3rd November 2011, 07:37 PM
Well it's about blooming time mate..... Hahaha

Looks good... What a difference a bigger set of boots and black rims make

AB
3rd November 2011, 07:40 PM
About time mate....Jeeesh...lol

It looks good mate, love the whities!!!

Mazodude
3rd November 2011, 07:41 PM
About time mate....Jeeesh...lol

It looks good mate, love the whities!!!
not so white anymore :D
love the mud

Mazodude
3rd November 2011, 07:51 PM
Got to love ground clearance :D
http://img153.imageshack.us/img153/2879/photo2wp.jpg
btw this is at ripley

growler2058
3rd November 2011, 08:29 PM
Mighty fine lookin whitey mate

nowoolies
4th November 2011, 06:01 AM
look`s all white i suppose hahahahahahaha
top rig mate

Thirsty
4th November 2011, 07:05 PM
Nice Truck, Tyres look good on it.

Cheers

Mazodude
4th November 2011, 07:20 PM
Thanks guys.
Bought the bearings for the drawers, so will have pics up for that in a couple of weeks.

Maxhead
4th November 2011, 08:46 PM
Nice Whitie mate, they look a lot better when they're all brown...LOLOL

Silver
4th November 2011, 11:41 PM
thanks for sharing the photos !

DX grunt
6th November 2011, 06:33 AM
Welcome to the forum and great to have you onboard.

Take care out there.

Rossco

Mazodude
14th November 2011, 10:26 AM
Here is an update on the drawers :D
spent all day saturday building
still not finished.
carpet is marine with rubber under.

original floor with high hats (to mount drawers on)
http://img710.imageshack.us/img710/204/img20111112112730.jpg

undercoat
http://img94.imageshack.us/img94/6292/img20111112115712.jpg

carpeted
http://img836.imageshack.us/img836/5218/img20111112122007.jpg

carpet with high hats
http://img263.imageshack.us/img263/8947/img20111112130009.jpg

drawer housing
http://img337.imageshack.us/img337/9240/img20111114171830.jpg

nowoolies
14th November 2011, 11:09 AM
sweet looks good
piccies we luv piccies keep em comming

Thirsty
20th November 2011, 09:00 PM
Mate the draws are coming along great, good to see your using steel. ive see so many timber ones fall to pieces when they hit the corrogations.

Mazodude
21st November 2011, 10:04 AM
Mate the draws are coming along great, good to see your using steel. ive see so many timber ones fall to pieces when they hit the corrogations.

yea the steel is solid as :D

Mazodude
9th December 2011, 02:02 PM
Just a quick update.
Rain gutters have been sanded and repainted :D (lots of rust)
should also have the drawers finished this weekend

stay tuned for pics :)

Forced Offroad
10th December 2011, 08:11 AM
Nice rig mate,
Can I get a little more info on the roller your using mate.
And how painful is the tipicl qg rust in the rails and also watch the rear window. Mine was hell, it's was the reason why I turned mine into a dualcab. I can thank the old school style of roof racks, where there was a full length rail sitting in the gutter as the main bracket.

Keep it coming mate.

Cheers jay

Mazodude
10th December 2011, 08:44 AM
What do I have to watch for on the rear window?

The roller bearings are rated to 1 ton. They have polyurethane inside the bearing.
also in the pic with the drawers, there are two bearings side by side, to hold more weight.

ok the model number: NSK NS7L5
they are about $3 each.

frenzy
10th December 2011, 09:23 AM
Looking good mate. Did you fab the drawer frame yourself? Whats the reason for the high hats?
Cheers,
Steve

Mazodude
10th December 2011, 01:38 PM
No my mate is knocking them up. High hats are to lift it off the floor.

Forced Offroad
11th December 2011, 06:55 AM
What do I have to watch for on the rear window?



The rails and also there are 2 drain hole in the window from memory. They can block up then water gets into the welded window pinch seems and starts rust around the bottom of the rear window under the the window rubber seal. The window can be poped out easy enough, to check or repair. Also rust likes to start under the back doors wheel arch. You can remove the rear flare and then the hub plastic trim to check. Also common is the bottom main rail on the car. Unfortunately the qg's are coming up to 20 yrs old but there still the best 4b ever sold in Aus.

Cheers jay

Mazodude
2nd February 2012, 12:06 PM
just a quick update.
Bday is coming up and a new hid spot light is on order :D
got to love the guys a torq4x4 :)
pics to follow.

also wired up a in-cab electric winch controls.

rusty_nail
2nd February 2012, 12:47 PM
looking forward to it mate

Mazodude
3rd February 2012, 04:38 PM
as promised.
Spot and spread lights, just plain 100w halogen atm
http://img100.imageshack.us/img100/8489/img20120203155814.jpg
should be getting the hid spot from torq4x4 on monday or tuesday :D

in cab winch controls:
just a simple two switch layout. the first is to stop accidental usage of the winch if not flipped.
use a power extension lead for the wires that go back to the winch solenoids.
Still have it hooked up so I can use the hand control if needed.
http://img31.imageshack.us/img31/2337/img20120203155909.jpg

Bigrig
3rd February 2012, 04:42 PM
Nice old mate ... so when we going for a play?? And a beer obviously!!! lol

Mazodude
3rd February 2012, 04:50 PM
well I am itching for a play. just been so busy with life.
it also has not helped that it has been way too wet to go off road. (yea I know, what?)

Bigrig
3rd February 2012, 05:21 PM
well I am itching for a play. just been so busy with life.
it also has not helped that it has been way too wet to go off road. (yea I know, what?)

Are you coming out to Springs in early March??

Mazodude
3rd February 2012, 06:45 PM
I didn't know it was on.
Note to self: read forum more often.

I will have a look

Mazodude
9th February 2012, 06:15 PM
Something just arrived. I wonder what it could be.... ? :D
http://img813.imageshack.us/img813/4633/img20120209173715.jpg
Thanks Torq4x4

Mazodude
11th February 2012, 04:36 PM
Well I have the HID installed and working
also got rid of the rust and grey crap on the bull bar (see previous pic)
http://img818.imageshack.us/img818/8510/img20120211155853.jpg
Damn is it bright.

Mazodude
17th March 2012, 04:31 PM
just got a safari snorkel fitted thanks to the guys at torq4x4.

Mazodude
22nd March 2012, 07:22 AM
Well the clutch went in the truck as I was getting the snorkel done. Bugger. :banghead:

Looking at getting a heavy duty clutch.