Thirsty's 4.5L GU

[Thirsty]

Hi.
The List so far -

ARB Sahara Bar, Kaymar Rear Bar, ARB Alloy roofrack, ARB Awning, Kaymar shovel and hilift roofrack mounted holder, Outback rear draw with fridge slide, OME 2" lift, Superior Draglink, Superior 3" swaybar disconects in the rear, Outback front recovery point, 285x75x16 Helcules Trail Digger Tyres, Redarc BCDC Charger, Optima Yellow top 2nd Battery, Blackwidow seat organiser, Blackwidow Rear door fold down table, Small door extension and the most important - 60L Engel

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5827.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5467.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5473.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5471.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5474.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5475.jpg
dirty photos to follow

[Clunk]

very nice looking rig indeed Thirsty, like it mate

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5926.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5976.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_5999.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/IMG_6001.jpg

[wildgu6]

Love it mate, Just a tad jelous at this end. Very nice rig with great bits and a great set up as well. Good work and love the pics.

Cheers Pete

[nowoolies]

absoltley sweet as mate
nice mud puddle there hahahahahaha

[T0nka]

Troyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy ! :smileyvault-cute-bi

Welcome to the forum mate!

Guys remember how i said before were some genuine good blokes from that "other forum", yeah well Troy is 1 of those blokes - super bloke

[Thirsty]

absoltley sweet as mate
nice mud puddle there hahahahahaha

Yeah that was deep, and i didnt make it through. but it was fun trying

[Thirsty]

Troyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy ! :smileyvault-cute-bi

Welcome to the forum mate!

Guys remember how i said before were some genuine good blokes from that "other forum", yeah well Troy is 1 of those blokes - super bloke

Hey Tonka,

thanks for the nice words, when are you going to join me in a glasshouse run?

Cheers

[T0nka]

As soon as i get a job and put some fuel in my truck :)

[Thirsty]

Had a bit of time on my hands after work today and decided to try and find the knock in the front end and the vibration coming threw the steering wheel. It has had a hard week with 2 trips to glasshouse. The problems I have discovered are - Left hand auto hub (stuffed) Not engaging and making the dreaded rattle, Front left hand wheel bearing (on the verge of colapsing), Movment in the right wheel bearing but not that bad, Last but not least, passenger side engine mount (broken). So its time to fix it. AVM HD Manual Hubs, New wheel bearings (both sides), New engine mounts (both sides) and I may even put some new rotors and pads in front while I'm at it.

Cheers

[T0nka]

They must be paying you well

[Thirsty]

They must be paying you well

No, just get things a bit cheaper.

[nowoolies]

piccies we luv piccies
not just off road but fixing things
keep em comming mate

[Bexc]

Nice rig!
Great pix 2 im yet 2 get sum good shots of myn yet...

[Finly Owner]

Is that the pine forest near me?

[Thirsty]

All pictures were taken at Glasshouse, on the powerlines track.

[BearGUST]

So that flex is with the OME 2" lift and sway bars disconnected? I've just fitted an OME 2" lift, I'll be rapt if I get travel like that!

[Thirsty]

And the swaybar isnt disconnected.

[Thirsty]

Just Pulled both front hubs apart and found a s**t load of water in them. Right wheel bearing had started to full apart and the left had fused itself to the shaft.
Bugger

[Thirsty]

Hopefully receive my new AVM HP Hubs tomoz or friday (4 weeks in waiting). All ready to go for the weekend. Cheering!!!! its only been off the road for a MONTH!!!!!!!!
cheers

[Rip'n'Shred]

Nice rig, looks tough, especially covered in mud!

Love the look on the little fella's face in the back seat on the 3rd action pic you posted. Looks like he is enjoying the ride! LOL

How do you find the ARB alloy roof rack in regards to wind noise, fuel consumption, quality of build, etc. Any info appreciated.

Also after info on the ARB awning. Are you happy with it and would you recommend this particular awning? Are they as easy to set up as the advertising material would lead you to believe?

Much appreciate your reply

Damo

[rusty_nail]

sweet ride mate! happy trials!

[Thirsty]

Nice rig, looks tough, especially covered in mud!

Love the look on the little fella's face in the back seat on the 3rd action pic you posted. Looks like he is enjoying the ride! LOL

How do you find the ARB alloy roof rack in regards to wind noise, fuel consumption, quality of build, etc. Any info appreciated.

Also after info on the ARB awning. Are you happy with it and would you recommend this particular awning? Are they as easy to set up as the advertising material would lead you to believe?

Much appreciate your reply

Damo

Hi Damo, Thanks for the comments mate. My Son loves to go bush. As for the roof rack, this one suits my every need. you only hear the wind when the sunroof is open and i honestly didnt notice any increase in fuel consumption. but it is a petrol so its thirsty anyway. The awning is quick to set up, i can have it set up before my wife has all the kids out of the car. The main things to look for with an awning is that it has 3 velcrow canvas securing straps down each side to prevent sag,watch some of the cheaper ones as the plastic connections are not designed to flex so they break easy. I could be called bias too, Although the product is great quality and it suits my needs. Obviously i highly recommend them. Cheers and good luck with your decision.

[Thirsty]

A bit of an update,

I ordered a Front ARB Airlocker yesterday, I proberly won't put it in for a while as I'm going to do the swivel hub seals and king pins at the same time. I already have a rear locker so before i install the front I'm going to put a 9500 pound Bushranger winch into the Bullbar (Bushranger have a deal that you get a free set of HID spotties with every winch Bought) and there a good quality winch with solid state electrics.
Other items to be done prior to the October Meet are - Snorkel, Rocksliders, Exhaust, UHF and Rear Awning. (most of all repair the broken aircon Pipe)

Cheers

[Rip'n'Shred]

Good stuff mate, sounds great. Thanks for the replies.

[Thirsty]

Cleaned The MAF, O2 Sensor, Dizzy and rotor button today, Not much of a difference. Once I run a tank of juice through it, that might tell the story then. I also decided to run a bit of Lucas injector cleaner through it. Just to see if that helps with economy.

Cheers

[Thirsty]

Received my new Lightforce 50w HID Genisis spotties today. I'll post some picks when I mount the on the Bullbar.

[Bigrig]

Received my new Lightforce 50w HID Genisis spotties today. I'll post some picks when I mount the on the Bullbar.

Not sure they'll be bright enough mate ...

LMFAO!!!

Looking forward to some piccies!!!

[Thirsty]

Another Update for the old girl,
The Compresser is all in, front locker gets fitted tomoz along with swivel hub kit. While were there, hopefully fit a snorkel as well. I'll try and post some pics tomorrow night.

[maxblack]

Cool pix, cheers.

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSC00002-1.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSC00003-1.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSC00004-1.jpg


The Snorkel is on, Now twin Locked and the 50w HID Gens Fitted (yet to be wired). A new dash organiser for the wife. Swivel hubs have had kits put through them. Next a new exhaust.
There crappy pics as I took them with a video camera

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/d72e6821.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/6cdfe2aa.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/c368ed90.jpg

[oncedisturbed]

Nice looking rig :)

[Thirsty]

When pulling the hubs off to put the front locker in, I found that the drivers side hub had torn the dust Cover off the inner seal and started rip the back out of the seal. Throughout the week I could hear a rubbing noise in the same hub. Pulled it apart yesterday and it had done it again, this time it only took 1week to destroy it. I have tried to tap the bearing cone in further and the seal pushed in about 3mm further than the last. Hoping this one doesn't rip out. But I'm not confident.

[Thirsty]

New spindle on, Like new now. $446 later. New set of extractors and a 2.5" mandrel bent sports exhaust with a hi-flow cat went on last week. Made a huge difference. Better on the highway, no more kick back on every slight incline. It cruises really well with a bit better take off. Very happy with the result. I also installed a GME TX3420 UHF with a AE4705 Ariel. Then I put a full locking kit on my Spotlights to keep them theives at bay. I wacked a couple of new front body mounts in and that improved the feel of the ride.
Cheers

[Thirsty]

Put some nice New BlackWidow (Escapegear) cotton canvas seat cover in the old girl today

[threedogs]

Hi Thirsty sent you a PM regarding truck, might also come down in kelvin for your driving lights unless you like blue
didnt see photo of blue covers my bad

[NissanGQ4.2]

pics say a thousand words so they say, I'm waiting :)

[nissannewby]

This things looks schmick It would have been good if old nissan did a few more of the 2 tone patrols i reckn they look great.

[Thirsty]

This things looks schmick It would have been good if old nissan did a few more of the 2 tone patrols i reckn they look great.

Cheers mate, Photos hide all the scratches. Next on the list, I think I'll put the winch in.

[T0nka]

Dude, monster tyres cmonnnn!

[T0nka]

Hey thirsty, r u aware if lismore are looking for a salesperson. I saw an ad

[Thirsty]

Hey thirsty, r u aware if lismore are looking for a salesperson. I saw an ad
Not sure mate, Go in and ask. Thats the best best way
Good Luck
Cheers

[Thirsty]

New rear brakes going on the old girl tomoz, and i just ordered the spare tyre and jerry can swing arms for the rear bar. Put it all together and send it in for painting. Keen as. Last weekend I put a 10000lb Tmax winch with rope into the Sahara bar. That come up a treat.

[Thirsty]

OK Heres a few pics after I spent hours on it today washing and polishing it. I tried a new product from turtle wax (not a product I usually use) but its quick and easy and works a treat. I even managed to get rid of a few bush pin stripes. Its called ICE Polish, more a quick detailer i think. Any ways heres a few pics with the new winch.
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0103.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0102.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0101.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0100.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0099.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0098.jpg

Next on the list the swing arms for the rear bar, that I have already ordered. Once there installed she will get pulled apart and sent in to be colour code as per the bullbar.Then comes a Long range fuel tank.

Cheers
Troy

[growler2058]

Thats a well sorted looking ride mate

[Thirsty]

A few Pics from the weekend @ Glasshouse
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0929.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0930.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0933.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0958.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN0961.jpg

[big_fletch]

Awesome pics mate, love the flex and wheels off the ground.. Looks Tough

[Thirsty]

Cheers fletch

[nissannewby]

Sickness gotta love glasshouse :). Are you gonna colour code the rear bar so it completes the two tone all the way around?

[Thirsty]

Absolutely Nissannewby, it would have been done by now but I have decided put a LS1 into it next year. So I have been buying bits and peices for the conversion instead.

[Thirsty]

I ordered 82% reduction gears today, they will be fitted on the 8th of Jan.

[Thirsty]

http://www.youtube.com/watch?v=m4AKLejUlQ8&feature=g-crec-u
A bit of winching

[Thirsty]

Just Bought a VX Senator 255kw LS1 and Auto to bolt into the GU

[Winnie]

You say that so casually!!

DIAL-A-TAP

[Thirsty]

You say that so casually!!

DIAL-A-TAP

Sorry mate, I am KEEEEEEEEEN AAAASSSSSS to get it in and running. But i'm looking at may-june before she will done.

[nissannewby]

Sickness any possibility of forced induction while your there :)

[Winnie]

Yeah just strap a turbo or two on while you're at it

DIAL-A-TAP

[Thirsty]

No, No turbo. The LS1 will be enough for now. LOL

[Thirsty]

The new motor that will be powering the patrol come June
http://www.youtube.com/watch?v=cW9DhtE1JZI&feature=youtu.be

[Thirsty]

The LS1 conversion has started. 4.5L Engine is Sold and will come out in a couple of weeks. This conversion will not happen over night. I work 6 days a week and have 4 kids, so that takes up most of my time. I'll do bits and pieces when I get a chance. I'm looking at a finish date of around June/July. Although I want it to look factory, so I want it to be A1. So I will post up pics and info as I go.

Pics are of the Gearbox and engine after degreasing and the new sump going on.
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1728_zps3c5c6afa.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1726_zpsb8f3c457.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1729_zpsd660c3cf.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1731_zps6fd572d3.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1733_zps1248575d.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1734_zps2c74a3a9.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1736_zps4f86ed59.jpg

I was actually surprised, The motor has 214 000klms on it and I could not see any signs of wear in the bores. No lip, no grooves. So I'm pretty happy with the condition of it.

Cheers
Troy

[wildgu6]

Nice work mate, thats one big mutha of a toy.
Cant wait to follow the progress and see the finnished product in action.
Good stuff Troy.

[Thirsty]

Removing the Old Engine.
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1798_zps84596943.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1804_zpsf64b0d0e.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1805_zps1765bc69.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1814_zps01aef8e1.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1818_zpsc92d01c0.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1819_zpse90b086d.jpg

[Thirsty]

The LS1 with the alternator relocation, New air con pump bracket, engine mounts and power steer res relocation bracket.

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1838_zps031ad7bf.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1858_zps790a817d.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1853_zps75450873.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1841_zps27c0aeb6.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1842_zps142e60d3.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1845_zps2ea9a840.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1857_zps52d659ac.jpg
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN1855_zpsc8b5b496.jpg

[NP99]

That is great work........

[Yabb]

Awesome ride.

[Dougie80]

it looks the goods and i bet it will sound the goods too!!!!!!!!

[Thirsty]

A bit of an update.I had the gearbox rebuilt with a stage 2 shift kit, kevlar belt, corvette servo, Z gate clutch and a billet torque converter with harden spline. I have now bolted it all together. The only issue i have is that the flange on the end of the drivers side extractor just touches a fin on the bellhousing.
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2253_zpsb25c7466.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2253_zpsb25c7466.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2252_zpsfa3cece8.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2252_zpsfa3cece8.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2249_zpsf85fc86f.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2249_zpsf85fc86f.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2247_zps88d86266.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2247_zps88d86266.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2248_zps815da81a.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2248_zps815da81a.jpg.html)

[NP99]

Mate, I applaud your skills.

[Thirsty]

It was a busy morning getting all into the GU, Here's some pics

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2254_zps1d5fc6e8.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2254_zps1d5fc6e8.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2256_zps5a014d04.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2256_zps5a014d04.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2264_zps188a6a97.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2264_zps188a6a97.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2268_zps8c0f7840.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2268_zps8c0f7840.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2279_zpsd5ab36ca.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2279_zpsd5ab36ca.jpg.html)

Just requires welding now.

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2326_zps3f895899.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2326_zps3f895899.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2328_zps4b8db9f5.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2328_zps4b8db9f5.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2327_zps22671e06.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2327_zps22671e06.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2329_zps90caf878.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2329_zps90caf878.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2330_zps354f84f7.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2330_zps354f84f7.jpg.html)

[NissanGQ4.2]

Hows it coming along Troy?

Looks good btw

[Thirsty]

Thanks NissanGQ4.2, Its coming along Slowly!!!!! But done properly. I have done a test fit with engine mounts welded in and it fits in perfectly. Im on schedule for a end of July finished date. I also installed the new walbro intank fuel pump today.

Cheers
Troy

[NissanGQ4.2]

Personally think its coming along nicely Troy considering your original was may / june and the fact you work 6 days a week and have 4 kids!!!

Going to be one mean beast ( for a GU anyway *L* ) when you have finished

[Thirsty]

Personally think its coming along nicely Troy considering your original was may / june and the fact you work 6 days a week and have 4 kids!!!

Going to be one mean beast ( for a GU anyway *L* ) when you have finished


Yeah it blew out in completion time because the gearbox took a month to get rebuilt. But it will be worth the wait!!!

For a GU HAHAHA

[NissanGQ4.2]

Yeah it blew out in completion time because the gearbox took a month to get rebuilt. But it will be worth the wait!!!

For a GU HAHAHA

still not far of the mark, yeh bloody Nissan Gearboxes took me that long 2 rebuild my auto and that was only back to stock!!!!!!!!!!

[Thirsty]

Engines all bolted in with the Ceramic coated extractors
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2387_zpscde3c8ce.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2387_zpscde3c8ce.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2388_zps73b9ab4e.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2388_zps73b9ab4e.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2389_zpsadc2890c.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2389_zpsadc2890c.jpg.html)

[Thirsty]

Bit of an update - I just ordered -B&M Pro Rachet shifter, New NGK Iridium Plugs, New MSD 8.5mm Leads, New Bosch O2 sensors, Lokar dipstick, Mr gasket Extractor gaskets and new PCV hoses. I have also organised for the hose doctor to come around and sort out the high pressure power steer hose on Tuesday. I have also ordered modified hose connection for the aircon pump and some brake line heat shields from Marks 4WD Adapters. For the record - Elliot @ Marks has been fantastic. He sorted my radiator hose issue out, with out hesitation. He couldn't do enough for me. Before I would hang up on the phone, he always made sure I understood the answer thoroughly to my questions.

I have also sent the 2 wiring harnesses of to Steve @ Killa Kustom Kables on tuesday. Should have them back in a couple of weeks. All graphed together, Vats removal and a 3way switch and loom incorporated for the thermos.

Cheers
Troy

[1 red gu]

hi mate great looking job your doing there
did you fit the motor with the standard sump, just wondering if you really need to change the sump over
i have a gen 3 ls1 and im saving for all the bits needed at the moment. I have a 3" lift and was wondering if i could fit it with the standard sump with enough clearance between the diff.
cheers

[vwace]

wow awesome ride. top conversion job too. love the ls1

[Thirsty]

Thanks Guys, The sump has to be changed!!! I'm still a little concerned about the sump I have fowling on the tierod.
Cheers
Troy

[Alitis007]

Did you use a rear drop sump from a chev truck or the original?

[Thirsty]

Did you use a rear drop sump from a chev truck or the original?

I'm not sure what is from. I friend got it for me from the states. It has a part number, so I'll call Holden today and find out.
Cheers

[Alitis007]

Marks has them but so do Eagle motors in Dandenong here in Vic, they import alot of crate motors and stuff from the states so they could help as well.

[04OFF]

Engines all bolted in with the Ceramic coated extractors
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2387_zpscde3c8ce.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2387_zpscde3c8ce.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2388_zps73b9ab4e.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2388_zps73b9ab4e.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2389_zpsadc2890c.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2389_zpsadc2890c.jpg.html)



The LS1 looks more at home in the engine bay than a 4.5L does , great work so far Troy, it will be soooooo nice to drive with that powerplant :bananarock:

And i dont mean just having heaps of power.

[nissannewby]

There's something missing from the valley :p

[Thirsty]

Thanks 04OFF, I'm hoping it will be a nice drive.
Cheers
Troy

[Thirsty]

There's something missing from the valley :p

Hahaha, yeah no turbo on this one mate!!!! More of a tourer LOL

[nissannewby]

So does that mean a blower isn't out of the question then :p

[Thirsty]

So does that mean a blower isn't out of the question then :p

You never know!!!! Best to get it running first.

[Thirsty]

A couple of pics from the weekly progress.

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2391_zps95adafff.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2391_zps95adafff.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2392_zps1047d01f.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2392_zps1047d01f.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2393_zps700795d6.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2393_zps700795d6.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2395_zps284baed4.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2395_zps284baed4.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2396_zps2225d9ff.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2396_zps2225d9ff.jpg.html)

[04OFF]

Can you get the shifter into reverse with one hand Troy ?, i seem to recall going for a Hurst in one of my cars, only because the B&Ms being a 2 handed affair to work the reverse lock out ?

2 handed reverse could be a pain offroading ?

[Thirsty]

Single handed mate, once you hit neutral, you flick the front lever and that opens the gate to shift further forward.
Cheers
Troy

[anasaz09]

That is one mighty ride mate ;) wish I knew how to mod :(

[scottyo]

love this!

[nissannewby]

You wouldn't happen to have a part number for the extractors? My mate who does this is interested as they fit quite well

[Thirsty]

Hey Nissannewby,

The part number is - GEN806EA, This part number is to suit Auto boxes only. There is another part number for a manual, let me know if you want that too.

Cheers
Troy

[Thirsty]

That is one mighty ride mate ;) wish I knew how to mod :(

Mate its not that hard, alot of the parts are buy off the shelf . And if there is other info you require, there is heaps of help here on the forum.
Thanks for your kind comments.
Cheers
Troy

[Thirsty]

love this!

Thanks Mate

[albone90]

love the rear set up~

[Thirsty]

love the rear set up~

Cheers mate

[Thirsty]

I got my wiring harness back today. Trucks booked in for the exhaust at Scotts rods for the first week of July. Starting to get excited now

[Thirsty]

Done about 80% off the running the wiring today. I need to buy some adapters for the temp and oil pressure sensors, so I can run the Nissan sensors. One spot I'm not sure of is the reverse fuse that is ment to be in the fuse box beside the battery. (From the Killa Kustom Kable instructions) there is no fuse there for reverse as per the top of the box. Can some one help me out with that? I've also ordered a nice looking momentary switch that is required for the power/economy, this should just replace the factory option on the console. I have checked things so far and I have dash lights and fuel pressure, so that's pretty exciting to see!! LOL.
Cheers
Troy

[anasaz09]

Thanks Thirsty for the tip, I might consider modding mine too

[Thirsty]

Radiator and Thermo Combo was ordered today from Aussie Desert Coolers. If I receive the radiator before the weekend, I could possibly be trying to fire it up on Sunday. So far I have turned it over and everything seems Ok. Fingers crossed, she will fire up with out a problem.

Cheers
Troy

[NissanGQ4.2]

Does it come with a shroud to suit the thermo's????

[Thirsty]

Does it come with a shroud to suit the thermo's????

Yes, it comes with a shroud all fab'd together. They really look the part and its huge compared to my old one.

[Thirsty]

She Runs!!!!!!!!!!!!!!!!!!!
http://youtu.be/tf5eIO3pIOk

[Thirsty]

Radiator doesn't fit!!!!!! The shroud hits on the inner guards. This calls for some light panel beating. I bring out the hammer this weekend and get it sorted. Next month is the big one, Booked in at Scotts Rods for the exhaust on the 11th and booked in at Radius Fabrication for a custom airbox and 4" Stainless steel snorkel on the 22nd.

Cheers
Troy

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2423_zps94d3c695.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2423_zps94d3c695.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2426_zps7f11d99f.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2426_zps7f11d99f.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2428_zpsbcb0f71a.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2428_zpsbcb0f71a.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN2424_zpsf614ed77.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN2424_zpsf614ed77.jpg.html)

[NissanGQ4.2]

Man that looks all nice and pretty, must be time for some mud 2 get on it

Bummer about the rad shroud not fitting, looks like you and the hammer sorted it out

Well watch your video of it running later when I feel like having a cry

[Thirsty]

First test drive

http://youtu.be/xbHtdqia5jQ

Sorry to the locals that live near me

[nissannewby]

What air box are you running mate?

[NissanGQ4.2]

First test drive

http://youtu.be/xbHtdqia5jQ

Sorry to the locals that live near me

U s!ck Troy, that sounds so nice :)

Damn I miss my Holden V8 now :(

[Thirsty]

What air box are you running mate?

Hasn't got one yet. I have radius fabrication making a custom one up for me.

[rusty577]

love it awsome job

[Thirsty]

Thanks rusty,

Cheers
Troy

[Timmo]

nice rig bro.........

[Thirsty]

Thanks timmo, I wish I could say its nearly done but there's still so much to do. LOL
Cheers
Troy

[Thirsty]

Now with the exhaust system
http://www.youtube.com/watch?v=8MBt6f9rDOw&feature=youtu.be

[Thirsty]

A bit of a break down on what it cost me!!!!!

Motor,gearbox,bolt ons and wiring - $3000
Marks adapter - $2300
Sump -$600
Genie extractors - $500
Fuel pump and reg - $200
Rebuild gearbox - $2334
Radiator and Thermo fans - $1120
Custom Airbox, Snorkel and overfow tank - approx $2000 Booked to be done on 29/7
Power Steer Hose - $120
Shifter -$289
New Plugs and Leads - $220
Lokka Dipstick - $90
Exhaust - $850
Ceramic coating - $270
Brake line heat wrap - $21
Wiring, Vats Removal - Killa Kustom Kables - $760
New PCV Hose - $90
Mod Plate - $240
O2 Sensors - $90
Misc Bolts,Oils,Coolant, senders and hoses - Approx $900
Truck for towing to Exhaust shop $120

Sub Total $14 194

I still have to get new aircon lines made and have it gassed -approx $500, get it tuned - $800, New front bump stops and 30mm bumpstop spacers - $220


Total $15 814
Cheers
Troy

[NissanGQ4.2]

A bit of a break down on what it cost me!!!!!

That is a list you don't show the missus when you ask to do a engine conversion!!!!!

Do you mind if I copy your cost breakdown over to the new Conversion thread Troy???

[Thirsty]

That is a list you don't show the missus when you ask to do a engine conversion!!!!!

Do you mind if I copy your cost breakdown over to the new Conversion thread Troy???

Go for it mate.

[Thirsty]

Progress on the airbox and snorkel
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/1004658_525876374150068_1218167527_n_zps9a88e37c.j pg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/1004658_525876374150068_1218167527_n_zps9a88e37c.j pg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/225230_525876347483404_632368447_n_zps87361aa0.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/225230_525876347483404_632368447_n_zps87361aa0.jpg .html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/999579_525876384150067_652842021_n_zps6e196775.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/999579_525876384150067_652842021_n_zps6e196775.jpg .html)

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/936535_529912357079803_160621284_n_zpse5a076da.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/936535_529912357079803_160621284_n_zpse5a076da.jpg .html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/1003342_529912383746467_2017542483_n_zpsf7df592a.j pg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/1003342_529912383746467_2017542483_n_zpsf7df592a.j pg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/733811_529912330413139_1939861839_n_zps2d409727.jp g (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/733811_529912330413139_1939861839_n_zps2d409727.jp g.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/996914_529912177079821_1692990160_n1_zps20d17fa8.j pg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/996914_529912177079821_1692990160_n1_zps20d17fa8.j pg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/1098515_529912210413151_1223144397_n_zps49a15a4b.j pg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/1098515_529912210413151_1223144397_n_zps49a15a4b.j pg.html)

[threedogs]

Are you running an electric water pump?
There used to be a guy John Bennet [retired] who enhanced OE water pumps from using pi$$y little pressed steel fans to using actual impellors.
He also had parts made to house the thermostat in the bottom hose. I hope I can find all his Paper work, this same guy designed the cooling systems on the V8 race cars.
He may have a web site not sure but a very talented guy with heaps of knowledge gone to waste. I had one of his systems on my cast iron 350 chev 4x4, you could idle all day with the aircon on,
that's how good his system was, He had systems to suit motor HP motors

[Thirsty]

No, it's all standard

[tezzza88]

nice clean patrol, I like the v8 touch. It would bee more drivable now with the 8.

[Thirsty]

Thanks Tezza. Its definately a different car to drive.
Cheers
Troy

[Thirsty]

A bit of an update. I had a fuel reg failure. That's what happens when but a cheap copy. So I have now replaced it with the orginal aeromotive fuel reg. I have also booked it in for a mafless tune @ power torque engines on the 6th of September. So I'll see how good she goes and hopefully improve the shift patterns in the auto. I have also had it all engineered and rego changed to suit.
Cheers
Troy

[NissanGQ4.2]

Hi Troy

How much did it set you back to get it certified / engineered???

Cheers

Toddie

[Thirsty]

Results from the dyno, 231.41hp/170.2kw - 405.1nm the patrol put out today. reached my target of 200hp. So I'm happy with that!!!!!!

[nissannewby]

Good stuff Troy. That would be a nice drive able package there.

[Thirsty]

Absolutley, Its a really nice combo. not over the top either.

[Thirsty]

This was one of the runs, Not the best one though
http://youtu.be/SAu-bYENr3I

[cvando]

such a nice truck. if i wasnt lucky enough to have a TD id have to put an LS1 in my truck.. so tough

[Thirsty]

First tank down and WOW what result, Nissan 4.5L = 25Lph - Holden 5.7L = 17.65Lph. That fuel consumption is from it untuned so hopefully I'll get some better figures now it has been tuned.
Cheers
Troy

[ANDY_M]

Love the air box mate, very tidy.

[Thirsty]

Thanks Andy, Scott's rods did a great job.
Cheers
Troy

[NissanGQ4.2]

First tank down and WOW what result, Nissan 4.5L = 25Lph - Holden 5.7L = 17.65Lph. That fuel consumption is from it untuned so hopefully I'll get some better figures now it has been tuned.
Cheers
Troy

Got to be very happy with that Troy esp not having it tuned yet

[Thirsty]

Dyno Results Sheet
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/null_zps64a2133f.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/null_zps64a2133f.jpg.html)

[ANDY_M]

Got to be happy with that!

[Thirsty]

Absolutely mate, she goes well now.
Cheers
Troy

[threedogs]

Don't know how I missed this, some good figures there, also nice set up you have too,
clean and functional,

[Thirsty]

A bit of an update, I Polished my snorkel.
BEFORE
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/996914_529912177079821_1692990160_n1_zps20d17fa8.j pg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/996914_529912177079821_1692990160_n1_zps20d17fa8.j pg.html)

AFTER
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3189_zps7a9305cc.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3189_zps7a9305cc.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3188_zps668fe3b0.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3188_zps668fe3b0.jpg.html)http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3187_zps2ad45249.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3187_zps2ad45249.jpg.html)

[_RYAN_]

This is awesome! Also, you're out of rego.

[Thirsty]

Cheers, Oh yes, I must change that sticker LOL

[Thirsty]

http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3257_zps97557ae6.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3257_zps97557ae6.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3256_zpsf3f3a723.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3256_zpsf3f3a723.jpg.html)
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/DSCN3240-Copy_zpsd112b8d0.jpg (http://s273.photobucket.com/user/troy1979-photobucket/media/patrol/DSCN3240-Copy_zpsd112b8d0.jpg.html)


And a quick vid. Nothing hard and I didn't have give it any but I like the sound!!!
http://youtu.be/c79JN-8V8S0

[Thirsty]

Click on the pic, there should be a few vids of my latest tripvup the beach with a few LS patrols
http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/th_GOPR0203_zps971250a5.jpg (http://i273.photobucket.com/albums/jj212/troy1979-photobucket/patrol/GOPR0203_zps971250a5.mp4)

[Alitis007]

I saw the other day you guys were organizing a trip of fb, how did it go?? From the vids it looked like you's had a ball!! How did you go with your new suspension setup aswell mate???

[Thirsty]

Great day and the new Superior hybrid superflex arms work a treat. So smooth on the beach. As you can see by how much the camera was moving!! But when you spend close to 6k on a complete new suspension system, you would be disappointed if it wasn't yeah!! LOL. It was great to finally see some other V8 patrols out there!! We made quite a rumble up the beach!!