PDA

View Full Version : Air Locker Install


Benno7
9th September 2011, 04:35 PM
If you have a tjm pro locker you can not reuse the bearings as they are a different Inner diameter.
I wouldn't recommend reusing the bearings any way.
Bearing part NO. for pro locker HR32010XJ (HKS brand) cost me $27ea (FOR FRONT DIFF)

http://www.youtube.com/watch?v=33pPBj5sr0M
AB
9th September 2011, 04:43 PM
Good Video Benno!!
satyx
18th October 2011, 12:48 AM
That almost makes it look to easy. :)
vk3mnm
19th October 2012, 02:17 AM
Don't know about you guys but i cant watch the video, says its set to private?

Cheers Illya
my third 256
19th October 2012, 05:47 AM
Don't know about you guys but i cant watch the video, says its set to private?

Cheers Illya
me too cant see
growler2058
19th October 2012, 06:30 AM
Same says private


Sent via my tapping thumbs
krbrooking
21st October 2012, 04:31 PM
Same says private


Sent via my tapping thumbs

Yeh I'm the same cant see the vid.
threedogs
21st October 2012, 04:39 PM
Can't see VIDEO, but can tell you TJM prolockers ARE awesome piece of kit
MEGOMONSTER
21st October 2012, 10:55 PM
x2 the TJM pro lockers are well worth the money you spend. One mate I knew had three trucks three different lockers and said by far superior lockers. He rambled on about why he liked them better but I wasn't really a 4x4 person until recently.


Publicly speaking to a private audience.
Sir Roofy
22nd October 2012, 08:32 AM
interesed in seeing this
PMC
25th October 2012, 04:41 PM
Great info!

Regards,

RLI
mudski
26th October 2012, 10:57 PM
Private vid is all I see :(
vk3mnm
27th October 2012, 03:31 AM
Great info!

Regards,

RLI

You saying you can see the video mate, coz the rest of us can't view it?
Cheers illya
billy_b**
12th November 2012, 01:59 AM
i also cannot see the vid
scotty83
12th November 2012, 11:28 AM
Ditto

Tapped on by ScottyB
rainman01
14th November 2012, 06:14 PM
Same here, can't see the video
nissanforever
4th January 2013, 10:17 AM
this video is private so i can't see it :(
Benno7
4th January 2013, 11:10 AM
http://www.youtube.com/watch?v=33pPBj5sr0M
mcleod
17th February 2013, 07:57 PM
That was really interesting, mind you I am not sure it is as easy as stated in the start. Great to see this sort of info avail though
Lieney
17th February 2013, 09:23 PM
Can see the vid.
Not a bad speel, but fairly quick guide on 'how-to'.
mudski
17th February 2013, 09:47 PM
Anyone know of any shops in the northern burbs of Melbourne who would fit an air locker if I provide the locker and compressor? I would fit the compressor and wire it up and run the hose... I'm waiting to see the opening price of the GSC lockers so won't be getting an ARB locker.
Alitis007
17th February 2013, 10:03 PM
Anyone know of any shops in the northern burbs of Melbourne who would fit an air locker if I provide the locker and compressor? I would fit the compressor and wire it up and run the hose... I'm waiting to see the opening price of the GSC lockers so won't be getting an ARB locker.

Do you just want the centre fitted?? I know a few trans and diff places.
mudski
17th February 2013, 10:56 PM
Do you just want the centre fitted?? I know a few trans and diff places.
Well it would be easier I if just took the car their and they did it. As I don't really have a spare car to run around in. Trans, Gears and Diffs in Campbellfield is one place I thought might be able to do it. Centre only though I would think.
I could probably do the job myself, but setting preloads and backlash is one thing I don't know and have the tools to do.
Alitis007
17th February 2013, 11:21 PM
Well it would be easier I if just took the car their and they did it. As I don't really have a spare car to run around in. Trans, Gears and Diffs in Campbellfield is one place I thought might be able to do it. Centre only though I would think.
I could probably do the job myself, but setting preloads and backlash is one thing I don't know and have the tools to do.

Theres Sam's auto's off wood street in thomo and theres another mob off edgars rd near tip top poultry their good too.

Pre load is easy all you need is a dial indicator to measure the backlash, but i'll get you the name of the second place they might have more experience with this sort of stuff.
mudski
18th February 2013, 08:58 AM
Not Mark Johnson from JPC, Johnsons Performance Centre?
Alitis007
18th February 2013, 10:18 AM
Not Mark Johnson from JPC, Johnsons Performance Centre?

Nah not JPC hes on Lipton drive, i cant think of the name but we have used him to reco a Hilux centre for a customer before but heres the rough addresshttp://www.nissanpatrol.com.au/forums/images/imported/2013/02/89.jpg
mudski
18th February 2013, 04:44 PM
Cheers mate. I will start the ring around when I get the locker.
kegatron
25th August 2013, 01:05 AM
Good Vid!, Cheers
Royo-m
23rd January 2015, 03:24 AM
Excellent video... i will look in the future to install the locker on my Y61 :)


Good reference, thanks!
HappyCamper*
23rd January 2015, 07:51 AM
Yes video makes it look real easy looking , I can only vouch for the ARB lockers as I have had them before ( still got them in old ute ) Air compressor comes in real handy for tyre inflation also . I have the factory diff lock in the patrol at the moment & still undecided to what to fit in the front ARB or Prolocker