Custom GU Rear Draws (With Interior Lights)

[big_fletch]

Okay Fellow Patrol Owners,
i have wanted to make a rear set of draw's for my GU for a while. I reckon i could make a set for about $500 (as opposed to the $2000 odd to buy a set).. I will be posting pics throughout the build and hoping to have them complete by the weekend..
I will be making them out of 12mm Ply, fully carpeted with Roller bearing draw slides. I will also be hoping to add an interior LED light to each draw so when opened at night i can see into the full length of the draw.

I have taken a few pointers from Rohan (Plassy's) set of draw's after having a good look over his home built set at last meetup (Thanks Buddy) lol:smiley_thumbs_up:.
If anyone has been looking at building draw's for their troll, stay tuned!

Fletcha

[Bigrig]

Okay Fellow Patrol Owners,
i have wanted to make a rear set of draw's for my GU for a while. I reckon i could make a set for about $500 (as opposed to the $2000 odd to buy a set).. I will be posting pics throughout the build and hoping to have them complete by the weekend..
I will be making them out of 12mm Ply, fully carpeted with Roller bearing draw slides. I will also be hoping to add an interior LED light to each draw so when opened at night i can see into the full length of the draw.

I have taken a few pointers from Rohan (Plassy's) set of draw's after having a good look over his home built set at last meetup (Thanks Buddy) lol:smiley_thumbs_up:.
If anyone has been looking at building draw's for their troll, stay tuned!

Fletcha

We're all staying tuned!!! sounds like a good plan with the LED's also!!

[Bob]

I am willing to let you Practice on my GU Fletch LOL

[big_fletch]

I am willing to let you Practice on my GU Fletch LOL

Haha well I just hope they come up ok, tonight is pretty much my first time using a circular saw. Have all my materials now, and have cut the base and sides up.. After work I run out of light pretty quickly lol.. You are quite welcome to take a few pointers from my build though mate Haha

[Sir Roofy]

i am willing to let you practice on my gu fletch lol

hey big fella
now you know us older gents move a tad slower than you young bucks
so if they come up ok you know who we will be calling on lol

[big_fletch]

Good stuff mate! And of course it wouldn't be a Fletch job without a lighting system installed!!! LOL!

Looking forward to seeing your build.

Haha thanks mate, I haven't really seen a set of draws with lights in them.. I will be using car door switches so as soon as draws are opened the light turns on.. Have almost finished cutting up ply, ready for assembly tommorrow

[fixer982]

Haha thanks mate, I haven't really seen a set of draws with lights in them.. I will be using car door switches so as soon as draws are opened the light turns on.. Have almost finished cutting up ply, ready for assembly tommorrowHi Fletch. I built mine from plywood too, and used a set of computer sliding shelf slides that I had around the place. I am looking at fitting lights to mine as well, but I am going to use a magnet and reed switch as it can be recessed into the drawer so won't catch on the contents. I made my drawers a bit high, and keep thinking I'll cut themdown, but they are ok for now.

[big_fletch]

Well took a few practice cuts with the Circular saw but have all my ply cut up and materials needed to complete my rear draws.. Thought i would get up a few pics of the build progress so far

Draw Runners
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0310.jpg

Draw Locks
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0313.jpg

Ply Getting Cut Up
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0314.jpg

Floor Piece
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0311.jpg

Draw getting Assembled
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0315.jpg

The weather has not been friendly over last day or so, which is slowing progress but am still determined to get draws complete by the end of sunday haha

[NissanGQ4.2]

loving the build thread already fletcha, what brand draw locks are those?

[Bigrig]

Well took a few practice cuts with the Circular saw but have all my ply cut up and materials needed to complete my rear draws.. Thought i would get up a few pics of the build progress so far

Draw Runners
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0310.jpg

Draw Locks
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0313.jpg

Ply Getting Cut Up
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0314.jpg

Floor Piece
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0311.jpg

Draw getting Assembled
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0315.jpg

The weather has not been friendly over last day or so, which is slowing progress but am still determined to get draws complete by the end of sunday haha

Love the work you've done building that Patrol around those pieces of plywood!!! What's all this talk of drawers about though?? lmao

Top job mate - looking forward to the continuing build!!

[MC97GQ]

Hey Fletch,

I don't know,you reckon first time using a circular saw, those cuts seem pretty straight.

Have you been foxing, cabinet maker in a past life. It's looking good, please keep the photos coming, draws probably wouldn't work in the ute, but I love seeing what people are capable of.

Mark

[NissanGQ4.2]

Hey Fletch,

I don't know first time using a circular saw, those cuts seem pretty straight.

Have you been foxing, cabinet maker in a past life. It's looking good, please keep the photos coming, draws probably wouldn't work in the ute, but I love seeing what people are capable of.

Mark

bunnings 1buck a cut *LMAO*

[MC97GQ]

Haha well I just hope they come up ok, tonight is pretty much my first time using a circular saw. Have all my materials now, and have cut the base and sides up.. After work I run out of light pretty quickly lol.. You are quite welcome to take a few pointers from my build though mate Haha

Mate as an Auto Electrician how do you run out of light.

The place should be flaring, more light than you know what to do with.

[big_fletch]

Hey Fletch,

I don't know,you reckon first time using a circular saw, those cuts seem pretty straight.

Have you been foxing, cabinet maker in a past life. It's looking good, please keep the photos coming, draws probably wouldn't work in the ute, but I love seeing what people are capable of.

Mark

Haha they seem straight in a photo, however the camera does lie LOL.. Just take the cuts nice and slow, taking my time


loving the build thread already fletcha, what brand draw locks are those?

Thanks mate.. The draw locks i got from in town from our local locksmiths, not sure of a brand though sorry.. They are on this website in Melb for sale though
http://ovesco.com.au/index.php?catname=Hardware&cat=1&sub=2&subname=Locks%20and%20Latches


bunnings 1buck a cut *LMAO*

I was going to get them to cut to start with haha, but i thought i would do the whole thing myself.. Pretty pleased with the way its going so far though

[big_fletch]

Mate as an Auto Electrician how do you run out of light.

The place should be flaring, more light than you know what to do with.

Im doing the job at home, dont even have a workshop or shed here so once nighttime comes around it gets hard to get things straight HAHA :1087:..
I will be putting lights into the draws though:thumbup:

[NissanGQ4.2]

thanks 4 the link, the reason i asked was i use to work for a company that use 2 on sell that sort of gear. Same stuff just a different mob

does this look familiar http://www.uesint.com/product/locks.php

[big_fletch]

Surly does mate.. I like these locks, reckon they will just look tops on the front of the draws

[NissanGQ4.2]

if they are the same or very similar as the UES ones they will look tops, I know the UES ones and yeh when I get around 2 doing draws that's what I will be looking at for sure. I'm sure your draw build will look like awesome mate :)

[MC97GQ]

:thumbup:
Im doing the job at home, dont even have a workshop or shed here so once nighttime comes around it gets hard to get things straight HAHA :1087:..
I will be putting lights into the draws though

Hey Fletch,

When you do the next DIY project all you will have to do is open the draws then night time won't be a problem:thumbup:

Mark

[big_fletch]

:thumbup:

Hey Fletch,

When you do the next DIY project all you will have to do is open the draws then night time won't be a problem:thumbup:

Mark

Haha that's the plan, or can just turn my 6 HID spotties on lol.. After this, next project will be either a fridge slide or custom roof console

[big_fletch]

Looking good Fletch. Will be following your progress this weekend mate!

How are you planning to secure them in the vehicle?

Sticky tape......... LOL.. Nah will be using brackets onto the 3rd row seat bolts on either side.. I will have side pannels top and front to have a completely flat floor from side to side

[big_fletch]

haha thought you'd say zip ties being a sparkie and all!! What's the plan for tomorrow?

Haha zippy ties and electrical tape is the only way to go lol.. Tommorrow I want to have the draws completely built ready for carpet.. Sunday I'm hoping to have the side pannels all finished and everything carpeted.. Fair bit over a weekend me thinks, might roll over into Monday.. Also buying new swag this weekend so got abit on

[big_fletch]

Yeah mate you'll be busy. Just keep your head down and remember we'll all be waiting for an update!! (but work safe too)

Yep will be, and I have my safety glasses and all other safety gear ready to go mate.. Work smart and Work safe!!

[big_fletch]

Righto Fletch, it's nearly 7pm and the sun has well and truly gone down mate. So where's the pics??? How much did you get done today?

Haha unfortunately didn't get anything done, absolutely bucketed down rain all day here.. Looks like I will be doing more tommorrow now.. I did get my new swag though so at least I got something done.. Will get back into the draws tommorrow and try get em all done and some pics up ASAP

[big_fletch]

Haha will do mate, get it up on the thread now

[frenzy]

How's the drawers going mate?

[big_fletch]

How's the drawers going mate?

Yer Draws are going very well, didnt get as much done this weekend as i had hoped with all the rain we have had, but still got a nice amount today. Will post pics up in a sec

[big_fletch]

Well rained again today but got some more work done on my Rear draws..
Today i got the Top of the frame on, made the draws and have mounted up all of the bearings and slides.
Tommorrow i will make the front of the draws and mount the latches, Glue everything together, paint and get ready for carpet.. Once all done i will install the LED Lights and draw switches

Frame together, bearings attached
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0317.jpg

As draw sits at the moment in back of the troll
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0320.jpg

Bearings in the Frame
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0318.jpg

[katwoman]

Nice job, so far, Fletch. You are very talented..

[big_fletch]

Nice job, so far, Fletch. You are very talented..

Thanks Kat, i love building stuff myself as opposed to buying all the time, personal satisfaction i think lol.. Also gives me something to do Haha.. I Wanna do a roof console after i have finished my draws as well

[katwoman]

Thanks Kat, i love building stuff myself as opposed to buying all the time, personal satisfaction i think lol.. Also gives me something to do Haha.. I Wanna do a roof console after i have finished my draws as well

I'll def be watchin that one... Centre or where sunvisors go ? I need a short centre one. ( one day)

[big_fletch]

I'll def be watchin that one... Centre or where sunvisors go ? I need a short centre one. ( one day)

Yep I will doing a centre console down center from rearview mirror to about the center roof light.. Thinking a slimline one at this stage but see what happens when the build starts.. I'll put uhf in roof but the hand piece will be down near radio with a map pocket in the middle of the roof console.. But will go into design and ideas when build starts.. The draws was the first build to really get my head around working with wood lol

[frenzy]

Nice work Fletch. You can't rush these things! Thanks for sharing.

[Bigrig]

You're far too neat Fletch!! You're making it difficult for dual left handed individuals like myself to compete in the DIY category on here!!!! lmao

They are looking the goods mate ... be interested in the console also - always thought about trying one, but always worried that my hack job would fall off the roof line and kill me!!! lol

[big_fletch]

You're far too neat Fletch!! You're making it difficult for dual left handed individuals like myself to compete in the DIY category on here!!!! lmao

They are looking the goods mate ... be interested in the console also - always thought about trying one, but always worried that my hack job would fall off the roof line and kill me!!! lol

Haha I hadn't thought of the roof console killing me, better re-design the mounts I was thinking of LMFAO (zippy ties and elec tape)

[big_fletch]

Got some more done today, even though it was raining again haha.. Little bit of a trim here and there and they are ready for paint and carpet.. Very pleased with how they have come up so far

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0321.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0322.jpg
Yes everything will be Flat when assembled lol, not like it is now
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0323.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0324.jpg

[growler2058]

Bloody good so far fletch where did you source your rollers and track from mate and how much were they if you dont mind me asking

[big_fletch]

Bloody good so far fletch where did you source your rollers and track from mate and how much were they if you dont mind me asking

The draw rollers are actually 25x50 3mm Ally box bolted to the draws, rolling on bearings top and bottom..6 bearings along top, and 6 along bottom.. Rolls very nicely lol

[big_fletch]

Coming along nicely fletchy! You'll wonder how you lived without them once they're operational.

Haha yer that's what I reckon, can't wait till there done lol

[Woof]

Looking great mate, job well done..

[nowoolies]

so when did you want to fit them to my bus did you say hahahahahaha

looking good mate

[big_fletch]

Ok so far costs are:
- Wood 12mm ply $100
- Bearings and Draw Latches $190
- Wood Glue and Screws $25
- Ally box (4 x 900mm Lengths) $ Feebie Lol
- Bolts, Nuts and Washers $35
- LED Draw lights, switches, wiring $40
- Marine Grade carpet $70

Total cost so far about $450 which I am wrapped with

[Sir Roofy]

watching with interest big fella

[Clunk]

coming along very nicely indeed Fletch, looking damn good

[big_fletch]

Well everyone i finished my draws off today, very pleased with how they have come out.. Tomorrow i will be fitting the draw lights and switches.. Also picked up a Genuine GU Troll Milford cargo barrier today as a gift after helping a mate out which i will be cutting and re-welding to fit my draw setup (Just to be safe when all loaded up).. Here some pics for everyone

Carpeting
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0326.jpg

All Finished
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0327.jpg

In The back of the Troll
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0328.jpg

My free Cargo barrier
http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0325.jpg

[growler2058]

Maaaate well done!!

[big_fletch]

Thanks buddy, im absolutly wrapped with how they came up.. Gotta start modifying cargo barrier to mount up as well tomorrow, and my LED Lights...... and then im all done lol

[Sir Roofy]

Well done big fella
now where did you say you lived ill be up shortly
to see if they fit ok

[Bigrig]

They look top dollar mate!!! You gotta be happy with the way they turned out!!

[big_fletch]

Well done big fella
now where did you say you lived ill be up shortly
to see if they fit ok

Thanks Roofy.. They did come up very well.. Im suprised you havent made some for yours mate lol

[big_fletch]

They look top dollar mate!!! You gotta be happy with the way they turned out!!

Absolutly mate, couldn't be happier.. All for a total cost of just under $500

[Sir Roofy]

thanks roofy.. They did come up very well.. Im suprised you havent made some for yours mate lol

got draws in this one mate-----but will be putting new ones in another rig later on

[Bigrig]

Absolutly mate, couldn't be happier.. All for a total cost of just under $500

Well under half price mate, and the satisfaction of doing them yourself!! A bargain on both counts!!

[big_fletch]

Well under half price mate, and the satisfaction of doing them yourself!! A bargain on both counts!!

Thats what i reckon mate, Plus after tomorrow mine will have Lights in the draws when opened which will be very Bloody Handy.. Will also try modify the cargo barrier to fit tomorrow as well.. Good thing i got 2 weeks off so i can knock some of my wish list off LOL!!

[frenzy]

Nice work mate! Very nice.

[Woof]

Bloody great job there Fletch, very professional matehttp://www.nissanpatrol.com.au/forums/

[big_fletch]

Thanks for the comments Everyone, Will post the Pics up tomorrow with the Lights all fitted up

[AB]

As always Fletch your work is perfection mate....Well done!

[nowoolies]

fanflamintastic mate
you takeing any orders yet ???????lol

[Timbo]

Looks awesome mate, well done. I think you should put HID's in the drawers just to match the rest of the 4wd. :D

[big_fletch]

Ok well had an early start this-morning, Lined the base of the draws with left over carpet.. Also made brackets and securely bolted the draws Down. Ran all of the wiring and mounted up the Lights switches and LED Lights.. I ran the wiring down to the back of the draws and clipped up the whole way. Lights are Live power all the time.. Will post up some pics when its dark tonight.. here are a few Extra Pics of the wiring for you all

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0335.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0339.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0337.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0338.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0342.jpg

[Sir Roofy]

ok well had an early start this-morning, lined the base of the draws with left over carpet.. Also made brackets and securely bolted the draws down. Ran all of the wiring and mounted up the lights switches and led lights.. I ran the wiring down to the back of the draws and clipped up the whole way. Lights are live power all the time.. Will post up some pics when its dark tonight.. Here are a few extra pics of the wiring for you all

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0335.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0339.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0337.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0338.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0342.jpg

very impressive fletch likey very much=====an other hidden talent

[big_fletch]

Thanks Roofy, i like building things and projects like this.. Keeps me occupied LOL

[Dark 1]

Top work there fletch, your a handy little fella aren't ya. Looks tha goods mate looking foward to seeing the beast in person at the meetup next year.

[Bigrig]

Yep - seriously good job mate!!!

[big_fletch]

Thanks guys, cant wait to see how good the LED's are at night.. Should be Bright as hell i hope lol.. Im still looking very forward to the Meetup next year as well

[big_fletch]

Pics on there Way Plassy, just uploading them now lol

[big_fletch]

Ok well darkness has fallen so i have taken a few pics of the LED draw lights on, here are some pics for you all.. All that's left now is to fit the cargo barrier.. Sorry about the nighttime camera Quality haha

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0343.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/IMAG0346.jpg

[Sir Roofy]

ok well darkness has fallen so i have taken a few pics of the led draw lights on, here are some pics for you all.. All that's left now is to fit the cargo barrier.. Sorry about the nighttime camera quality haha

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0343.jpg

http://i1212.photobucket.com/albums/cc459/big_fletch/imag0346.jpg

bloody ripper mate yep ill order two of them

[big_fletch]

7160

Looks like you've impressed them mate!

Haha thanks mate, thats a ripper photo LMFAO

[growler2058]

Sh1T hot fletch looks like close encounters of the third kind hahaahaahhahahaha The truth is out there hahaa

[big_fletch]

Haha thanks Plassy, thats Gold mate

[big_fletch]

Haha wasn't sure you'd be old enough to remember Waldorf & Statler! Bloody funny old coots from the Muppet Show! PML!

Hahahahaha Nah i know who they are mate, used to love the muppet show

[YNOT]

Fletch, some of your earlier photo's seem to have gone missing from photobucket?

Tony

[big_fletch]

Fletch, some of your earlier photo's seem to have gone missing from photobucket?

Tony

Yer i noticed that my original post with the photo's are ok, however all the Reply's with Quote's have the photo's missing?? Weird

[Woof]

Well done Fletch, let there be light and there was....http://www.nissanpatrol.com.au/forums/images/imported/2011/08/2.gif

[big_fletch]

Well done Fletch, let there be light and there was....http://www.nissanpatrol.com.au/forums/images/imported/2011/08/2.gif

Thanks Doggy, im glad they are all finished.. Now what to do for my next project??? haha

[big_fletch]

Haha might sell them, im just thinking of the amount of work that goes into them, i really underestimated the build process lol.. Possibly looking at building something for my mate TUR7LE on the forum here for his GQ, but with a Gun Safe built in as well.. I can supply the dimensions of the draws to anyone that wants to have a go at building some though?

[Clunk]

fantastic work there Fletch and a bloomin good idea having the leds in there too mate............. awesome job

[big_fletch]

Yeah it's no wonder they're expensive to buy eh? There's a fair bit of work involved but very satisfying at the end of it all and yours look really good mate.

Oh yer mate, i can definetly see why they are so expensive.. As you say its satisfiying to have done it all myself though

[MC97GQ]

Thanks Doggy, im glad they are all finished.. Now what to do for my next project??? haha

Hey Fletch,

Top job mate, no excuses now that you don't have enough light for your projects.

Next project, let me see(gazes into crystal ball), wont be happy to just have drawers, the neat freak in you will want compartments in those drawers so there is a place for everything and everything in it's place.:thumbup:

Mark

[big_fletch]

Hey Fletch,

Top job mate, no excuses now that you don't have enough light for your projects.

Next project, let me see(gazes into crystal ball), wont be happy to just have drawers, the neat freak in you will want compartments in those drawers so there is a place for everything and everything in it's place.:thumbup:

Mark

Thanks for the Kind words mate,
Haha already thought of that mate, compartments would be really handy lol.. Once i finish modifying the cargo barrier to fit then i will worry about next project i think

[nowoolies]

still waiting for you to fit them to my bus
whats the hold up hahahahahahahahahahaah

[damianovdd]

Top job!


I can supply the dimensions of the draws to anyone that wants to have a go at building some though?
It would be nice to have them.

[ozzyboy]

hey mate.Them drawers have come up a treat. nice work. Awesome walkthrough with the pics. I am going to attempt a set based on yours, with small modifications. ( narrower drawers to fit a dual battery on left side slot, and recovery gear right hand slot )
i have 2 questions if i can.
1) I see you have left seatbelts in. is there a reason, or can they be legally removed?
2) If you still have dimensions, any chance of sharing them? Will save a lot of headaches :P
cheers

ozz

[wildgu6]

Well i must of been under a rock for the past 4 months, just stumbled across this Fletch and mate you have done a bloody ripper job mate, you should be proud of your efforts fella.
Nice work, looks a treat.
If you get a minute sometime could you PM the specs to me mate, wouldnt mind checkin it out and see if im smart enough.......lol

Top job mate, well done.

[wildgu6]

bump: just so i can find it again

[hutchy84]

Nice job mate What do you recon the overall weight would be

[iht2670]

Good job mate what size are the bearings you used ?

Steve.

[Rick111]

Great work Fletch, is there any chance you could put up some measurements so I can get the sheets pre-cut...... Thank's heaps

[Alan GQpatrol]

awesome looking drawers would love some measurments aswel.

[bigcruzer]

They look great! I am about to embark on a build of my own, so I can only hope they turn out as good as yours have! Love the idea of the LED lights in the drawers on the pressure switch, so might attempt that too!

[Lewy]

WOW they look great!!!! Yes please could you post up the plans :-)

Cheers Lewy

[Rosco]

Haha well I just hope they come up ok, tonight is pretty much my first time using a circular saw.

Just a tip for you for cutting sheets straight.
You can clamp the box tube got for the runners to the sheet at the set back of the saw and run the saw along the edge of the tube to get the cut straight. Bit of setting up but a perfect cut.

Looks good and a great job also.

Great idea with the lights.

[Drew]

Damn nice job.

[Rip'n'Shred]

Great job, looks awesome

[brooks]

They look awesome if you don't mind will be using the light idea and some of the other ideas to make my own when I eventually get around to making mine.

[bigcruzer]

Hey Fletch just wondering if you have any pics of how you attached the drawers to the car! I know in an earlier post you said you were going to use an angle to the 3rd row seat bolts, just wondering if you had a pic. Thanks Ben

[boosh]

Awesome drawers! Def gonna look here when I g to build mine!

[NP99]

Just a tip for you for cutting sheets straight.
You can clamp the box tube got for the runners to the sheet at the set back of the saw and run the saw along the edge of the tube to get the cut straight. Bit of setting up but a perfect cut.

Looks good and a great job also.

Great idea with the lights.

And a 40 tooth blade helps.

How have the draws stood up to time and travel mate?

[soundfx]

Really nice job. You may just have inspired me.

[Smoothrun]

Wow. And i nearlg bought the ARB drawers this week. Fletch thats an awesome post with great detail. I recon i could do it az you have if you dont mind. My only concern was the sliders but you explained it great. Especially witb all your pics. Fantastic post mate anx i got a bit of a laugh too. Cheeers.

[skippy201284]

looking fantastic mate what carpet you putting on and wear u getting it from

[big_fletch]

Thanks for all the reply everyone, your all more than welcome to copy them.. Will be making a new set soon for the new troll so will start a new thread again

[kaynef]

Hey fletcha ust sined up and found this diy wile looking at your rear bar I know it was a long time ago but any chance youstill have the plans for these drawers and maybe on the rear bar aswell?

[kaynef]

Also what size bearings did you use?

[dysonest]

that light idea is great, might use it on my draws.
nice build mate

[blocko05]

great job mate. thanks for sharing