Duramax conversion

[Pav75]

Is there anyone in sydney that does duramax conversions thinking of doing one

[Truckus]

Thats the one I wish my rig had gotten with the Allison Trans as well, but no such Luck.

I too am interested in the answer to this one,

I looked at PID in QLD https://piddiesel.com/

and ADC now focus on parts and DIY install kits, rather than conversions https://afepower.com/australian-duramax-conversions-p-l

and you may find info by trawling through here https://www.facebook.com/Duramax-Diesel-powered-vehicles-Australia-1343031765713427/ or joining this group here https://www.facebook.com/groups/588897061650736

Killa also does them a bit less than PID https://www.facebook.com/Killa-Kustom-Kables-Conversions-202181769825285/ and Heath at PID is evidently busy a lot.

No doubt there are diesel conversion specialist that can do these in NSW, but generally hard to find on the net, although the Toyota 1VDJ V8 Turbo i done a bit in NSW (seems like Heresy to me though), so my advise is chat with your engineering signatory first, as they can let you know all the ins and outs and the right places to fit the right bits the right way for eventual engineering sign off.

Truckus's Engineer was John at Consulmotive that re-certified for NSW the Brunswick Diesel WA installation conversion https://www.consulmotive.com.au/ and remember you will have to get it weighed again as well.

Hope this assists....and feel free todrop a post in the member intro section to and introduce yourself and your rig, that way hose with the same model who have done similar can best advise.