PDA

View Full Version : 60L fridge ram



PeeBee
1st November 2020, 06:36 PM
I installed one of these units on my old 60L after tiring of the lid smacking my head. The ram is a 100n unit from the strut shop. The engel hinges are quite sloppy, so on the 60L fridge the closing action puts the lid slightly off square, however its a simple push to straighten it up, or I might look at a different hinge on the lid. the unit is fixed using nutserts.8232482325

PeeBee
2nd November 2020, 11:05 PM
I found a set of heavy hinges with bearings on line today that are only 30mm wide so have ordered a pair to replace the removable Engels hinges that have too much slop. I have very rarely needed to remove the lid in over 25 yrs so think this will work well. The 100newton rams are perfect. Funny enough the smaller 40l Engels have a kit with 150newton thrust and the door is lighter.