PDA

View Full Version : Hose connection on intake manifold



chrishu
9th June 2019, 08:55 PM
Hey guys. I bought an Nissan Patrol GQ y60 a few weeks ago and it was running perfect. A few days ago it died on a traffic light and i had to get towed to the mechnanics who told me it is a problem with the carby. The car starts fine and drives good until it the engine is warm. When i then speed up, especially in second and third gear, it starts jerking (jumping, …) but that stops when i push the clutch and rev a litle bit and then i can go again for a bit further before happens againn. When the car stands still the engine is running fine without problem. After i had a look under the hood myself i found a hose disconnected but i just cant figure out where its from. I marked the hose that disconnected red in the attached picture78702. Thanks in advance for any help.

mudnut
10th June 2019, 10:39 AM
Hello, and welcome to the forum. Where does the other end of the hose go? It looks as if your engine is a TB42. Slip over to the introductions and tell us about yourself and your Patrol.
http://www.nissanpatrol.com.au/forums/forumdisplay.php?2-Introductions