Netherhaven
23rd April 2017, 06:14 PM
Hi all, returning member here.
Need your thoughts on this one.
Vehicle: Y61 4.2TD DX intercooled.
I've checked the forums however no luck for my situation. I've changed the axle oil seal (left front) replacing seals and bearings, checking swivel hub tensions etc etc (done this job before) however this time when tightening the stub axle I now cant turn the axle by hand and the swivel hub is too tight. I've checked king pins and they are fine. All goes tight when tightening the stub axel. Any thoughts mate???
Need your thoughts on this one.
Vehicle: Y61 4.2TD DX intercooled.
I've checked the forums however no luck for my situation. I've changed the axle oil seal (left front) replacing seals and bearings, checking swivel hub tensions etc etc (done this job before) however this time when tightening the stub axle I now cant turn the axle by hand and the swivel hub is too tight. I've checked king pins and they are fine. All goes tight when tightening the stub axel. Any thoughts mate???