PDA

View Full Version : Wanted 4.6 ratio rear diff gears for h260 diff



GU CAMPER
12th December 2016, 02:34 PM
I'm chasing some 4.6 ratio diff gears to fit a h260 rear diff on a 2005 gu patrol 4.2 ute

Cheers Andy

nissannewby
12th December 2016, 06:58 PM
They are fairly rare mate. You may have to buy new.

4.3 are fairly common.

GU CAMPER
12th December 2016, 07:27 PM
Yeah I'm finding them hard to find Might have to go 4.3 if I can't find one. Just means I need to change front diff as well
Do you know who sells them new

nissannewby
12th December 2016, 09:30 PM
Yeah I'm finding them hard to find Might have to go 4.3 if I can't find one. Just means I need to change front diff as well
Do you know who sells them new

You could go genuine. Or any aftermarket supplier should be able to help you out. Are you looking around your local area or somewhere else in the continent? Going from 4.1 to 4.3 will gain you about 200rpm.

Avo
13th December 2016, 12:32 AM
i seen some on a local buy swap sell page just 10 min ago over here in WA

Avo
13th December 2016, 12:51 AM
found em..500 for the 2 ..dunno what they are worth or if it's even worth the effort

GU CAMPER
13th December 2016, 06:43 AM
You could go genuine. Or any aftermarket supplier should be able to help you out. Are you looking around your local area or somewhere else in the continent? Going from 4.1 to 4.3 will gain you about 200rpm. I already have 4.6 ratio in the front. So trying to stay with 4.6 Just had trouble with the rear centre so I need to replace it
I'm looking everywhere. I got the original ones from Marks Adaptors. But they don't sell them anymore

GU CAMPER
13th December 2016, 06:44 AM
found em..500 for the 2 ..dunno what they are worth or if it's even worth the effort

Do you have a link for them

Avo
13th December 2016, 09:56 AM
Do you have a link for them

here ya go mate https://www.facebook.com/groups/191066254401070/?fref=nf it is a local buy swap page on FB...if you cannot get in let me know..i can go see him,or message him on the [page and maybe share his email with you and your with him,we live about 30km away but willing to help out if i can

cheers

PS.tried to pm ya but your storage is full

Avo
13th December 2016, 05:14 PM
GU CAMPER still cannot message you mate your inbox is full,i have managed to get this fellas phone number for ya

GU CAMPER
13th December 2016, 05:19 PM
Hi Avo

Thanks for the link. Have just sent a request to join the group. Will have a look when I get accepted

I have cleared a heap of messages. Might go thru now

Thanks heaps
Andy

Avo
13th December 2016, 06:03 PM
just sent it mate cheers,they may not accept you as you are not a local...not sure,

jack
13th December 2016, 09:50 PM
Hey Andy, ignore the link i sent you on faceache. I reread this post after I sent it.

GU CAMPER
14th December 2016, 08:04 AM
Hey Andy, ignore the link i sent you on faceache. I reread this post after I sent it.

Cheers Jack

GU CAMPER
14th December 2016, 04:07 PM
Bump. Still looking. The ones Avo found are for a h233 diff

GU CAMPER
16th January 2017, 06:07 PM
Bump. Still looking

AB
16th January 2017, 06:11 PM
Have you rung Patrolapart?

I managed to get some pretty quick off them when I got my 35's.

GU CAMPER
16th January 2017, 06:17 PM
Yeah tried Aaron there a couple weeks ago. Might try him again

MudRunnerTD
16th January 2017, 06:20 PM
so my understanding is it Must be H260 size and it Must be out of a Leaf sprung rear Ute only. none of the others will fit. I have a mate running the Coil H260 in the rear of his Comp truck and blew it in a race and had a heap of trouble replacing it and found Leafys but they had a different spline count.

GU CAMPER
16th January 2017, 06:22 PM
That's my understanding to Darren

nissannewby
16th January 2017, 10:14 PM
so my understanding is it Must be H260 size and it Must be out of a Leaf sprung rear Ute only. none of the others will fit. I have a mate running the Coil H260 in the rear of his Comp truck and blew it in a race and had a heap of trouble replacing it and found Leafys but they had a different spline count.

Correct. Leafs have a different bearing setup for the hubs as well over the coils. I believe the coil 233 is 33 spline then leaf 260 35 spline and the coil 260 37 spline. I may have the 260 ones ass about.

GU CAMPER
18th March 2017, 01:29 PM
I have ended up getting a new 4.6 crown wheel and pinion from Nissan
My mechanic has fitted it but now it made a loud bang when put in 4wd after a few hundred metres.
Does anyone know what could be causing it. Cheers Andy

nissannewby
19th March 2017, 10:05 AM
Are you certain the front is a 4.6?

GU CAMPER
19th March 2017, 09:40 PM
I'm pretty damn sure
I had the 4.6 diff gears put in a couple years ago. Changed from 4.1
Will have to double check tho
The speedo changed the right amount when I changed from 4.1 to 4.6

nissannewby
19th March 2017, 09:47 PM
By what you describe it sounds like your experiencing wind up of the transfer case. Or there is a problem with one of your locking hubs.

Are you saying you have had a 4.6 in the front for years or front and rear 4.6 for years? What numbers were stamped into the gears?

GU CAMPER
20th March 2017, 11:22 AM
Yeah I had 4.6 in front and rear for a few years. Just had trouble with the rear recently. So I replaced it
Will have to check numbers
Might be a problem with locking hub.
Will check that out
Cheers