View Full Version : qg tow bar
Forced Offroad
12th April 2011, 10:05 PM
g'day
can get some idea how a rear tow bar is fitted to the gq... where is it bolted to the chassi
cheers Jay
NissanGQ4.2
12th April 2011, 10:15 PM
Hope this helps, if you need more pics, just let me know
Drivers Side
3731
Passenger Side
3732
timbar
13th April 2011, 12:12 AM
also chasis rails have bolt holes in them for your towbar
TuffTD42
16th April 2011, 12:44 AM
If you are fitting a second hand tow bar & don't have the original rectangle nuts then most likely need to cut some 3mm flat bar up & drill the correct size hole in it. these spread the weight over the are on the chassis where the bolts go thru. also it's easiest to weld a bit of thin rod to the plate & you'll have to do the same to the nut or weld it to the flat bar so you can reach up inside the chassis rail.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.