PDA

View Full Version : [PERTH] Chasing extractors for a TD42 with a 2.5 inch outlet



Ramsey
8th January 2016, 08:36 PM
Hey all,

Chasing extractors for a TD42 with a 2.5 inch outlet. Doesnt matter if it has surface rust, can easily be sand blasted and resprayed.

Regards,
Ramsey

Stropp
8th January 2016, 10:04 PM
You can buy new from mettams mufflers in midland ask for mark

Ramsey
8th January 2016, 10:35 PM
I heard they are quite good in midland, cheers.

Ramsey
9th January 2016, 11:10 AM
Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.

I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?

http://www.tuffcarparts.com/index.php?route=product/product&product_id=1284

Stropp
9th January 2016, 02:09 PM
Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.

I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?

http://www.tuffcarparts.com/index.php?route=product/product&product_id=1284

havent heard of them but aussie made so should be ok and 100 bucks cheaper

Ramsey
9th January 2016, 03:15 PM
Seem decent enough, Tiger ones it is.