GQ td42 10mm upgrade

[Pezzer]

Hi all I'm upgrading my 94 GQ TD42 with the addition of a turbo, my pump is the standard 10mm, I have the opportunity of a 2005 GU TD42 11mm with boost compensator will this fit my motor and is this a good upgrade as my budget won't allow for a 12mm just yet. Trying to get close to 20psi spooling from 1400rpm for towing.
Thx

[Robo]

From the research I've just done, 11mm should certainly be large enough for towing.
The boys here pointed me in that direction
modified 11mm tuned for 20 to 22psi ,+ matched turbo upgrade will get ya 50% jump in torque = say around 580nm.
I am also looking at towing but still streetable if ya follow.
Oh and you will want a new clutch for that sorta gain in power.

12 mm may be over kill.

[Pezzer]

Thanks Robo, I'm Auto by the way..

[Robo]

It would be worth getting the pump rebuilt by an expert like Shawn at,
@ Diesel Central near you in Qld, before you fit it.

Shawn recons, upgrades, pumps for work shops all over AU.

As for the auto, I'd be looking at say a nomad kit and improved cooler for a start.
Suggest you research in case that sort of pressure gets to much for the std auto box.
cheers

[Pezzer]

Starting to worry now just picked up the GU pump and it has many different items that are not on mine especially the sender underneath? Oh yes and the lower mount dosent line up because of this unit underneath..
61268
61269
61270

[nissannewby]

Thats a Ti pump that came on the factory intercooled engines. The module on the bottom is a timing control solenoid. You can get it converted to full mechanical which will be the easiest option other than selling it again.

It needs a ecu or some sort of controller to make it work correctly.

[Pezzer]

Just great........s@#&

[Robo]

Just great........s@#&

And the ti pump cost ya how much?
Sometimes ya need to look past the hard yards and $$, to think what the end result will be.
ya gotta part with $$$$$$ to get more ponies.

done up pump will set ya back kk.

Humm my GU TD42t has no computer
so going by our mate nissannewby advise,
that could be an option for you it's possible to not need an computer only the correct pump.

[Pezzer]

Yes just so many things going on right now was hoping that would be the pump sorted, ah well at least it's still a driver for now. Thanks for to advice everyone..

[Pezzer]

Oh well at last something sorted Im keeping my pump body but with all the 11mm plunger and Boost compensator etc added to it, all done for $800, I thought that was pretty good. I now have all the loom out of the donor car, auto from a Safari Turbo. So once my boat has sold we are ready to start this conversion, cant wait.

[Pezzer]

61510 Picked up my new 11mm pump today so lts bolt it up...

[Robo]

So who did the pump for ya?.
Let us know how the trol goes finished.
don't forget the dyno sheet - upload here.

[Pezzer]

My pump was done by Alex Clarke Diesel specialist on the Gold Coast, Once I start it Ill post regular and the out come dyno....