PDA

View Full Version : Cabstar/Patrol Gearbox



Mick88
2nd September 2015, 08:01 PM
What Nissan four cylinder "petrol" engines will bolt up to a Cabstar/Patrol gearbox with standard Nissan parts or bell housing?
Any of the "L" series engines?
Is there a bell housing that will allow a Z24 2.4 litre engine to bolt up to this gearbox?

Cheers, Mick.

Cuppa
2nd September 2015, 08:21 PM
According to my Cabstar manual the 3 petrol motors fitted were the Z16, Z20 & Z22.

Woof
2nd September 2015, 08:50 PM
Nice introduction mate............slip over here www.nissanpatrol.com.au/forums/forumdisplay.php?2-Introductions and post up an introduction, it is something we like all new members to do before asking for assistance so we can welcome you, that way everyone gets a nice warm fuzzy feeling

Mick88
3rd September 2015, 08:22 PM
Than you Cuppa,
Would you know if the Z24 has the same bolt pattern as the other Z's you mentioned?
Cheers, Mick.

Cuppa
3rd September 2015, 11:29 PM
No idea Mick. Following Tuppa’s advice might see you get further info.

GQ TANK
29th January 2016, 11:30 AM
Late reply.

Im sure I read some were that they are basically the same box as the mq range. Possibly lower 1st gear

GQ TANK
29th January 2016, 11:41 AM
http://www.patrol4x4.com/forum/nissan-patrol-mq-mk-12/sd33-p40-4spd-5spd-cabstar-517/