Merged - Deleted "Wanted"

[CrazyDave]

Hi Gang,

Really on the hunt for two front doors for a GQ Patrol, hoping colour white.

If anyone has any than please PM me...

Thanks a million!

[AB]

What area are you in CD?

[CrazyDave]

That's the problem I'm the equivalant of an American Mexican...Tasmania!

Hey, if anyones coming down on the Spirit of Tassie for a weekend bring down some white GQ Patrol doors will ya...hehe.

They seem to be rare as hens teeth down here so i may have to come up to grab them on one of my adventures to the mainland one day.

Anyway, PM me if anyone has or knows of a good spot to get em....Thanks guys.

[Timbo]

Shot you a PM mate. Couple of places in Melb who have them.

[CrazyDave]

Cheers G-Unit. :)

[89GQ]

Hi all, Im'e after a rear diff housing, Disk to Disk out of a GQ with a 4.2 diesel motor to keep gearing the same!Currently have Drums and they are pretty useless pulling me up thing is im'e in adelaide and they seem pretty scarce,Cheers.:)

[Timbo]

There's a couple wreckers in Melbourne.. you could probably get it freighted over and I doubt it'd cost an arm and a leg.. trucks going from Melb to Adelaide every day.
If you're keen let me know and I'll PM you the details.

[AB]

Like what G-unit says, I don't think freight will be over the top from Melbourne to Adelaide.

Thanks G-Unit.

[89GQ]

There's a couple wreckers in Melbourne.. you could probably get it freighted over and I doubt it'd cost an arm and a leg.. trucks going from Melb to Adelaide every day.
If you're keen let me know and I'll PM you the details.Cheers G-UNIT, If they do it id'e want the housing and disks and axles,Dont really need the centre as i can put mine in it,The main thing is as long as it came out of a 4.2.As the 2.8's and 3 litres are different ratio.Would really appreciate if you could make some enquiries.Thanks. Jeff. Iv'e heard also the splines on the axle are different between 2.8 and 4.2 etc.

[Timbo]

You could give Patrolapart a call and see if they have one Patrolapart (http://www.patrolapart.com.au/index.html)
Also Hall 4x4 (http://hall4x4.com.au/) are a good wreckers and probably have what you need more so than patrolapart. Everytime I call them, they never have what I want. Hall's 9/10 times do.

Give em a call.

[YNOT]

As far as I'm aware all GQ and GU small rear diffs are 33 spline. It shouldn't matter what the ratio is if you are going to fit your original centre.

Tony

[MudRunnerTD]

X2 mate, you will likely get the whole diff including the centre regardless what it is out of. Likely to be a 4:11 anyway so consider it a bonus if it is. I doubt they will strip the centre out for ya and the freight will be the same regardless.

There is also a good Wrecker in Ballarat. jump on google and have a look mate.

Good luck

[Donna]

Sorry haven't got the hang of this yet Andy.
But does anybody have any for sale. Nissan Patrol 1992 GQ ST
Donna.

[AB]

Hi Donna, I have put it in Wanted section.

[Minx]

There's one here with a serious roo smasher on the front.

http://cgi.ebay.com.au/1992-Nissan-Patrol-GQ-ST-red-gold-5sp-M-Wagon-/270595433060?cmd=ViewItem&pt=AU_Cars&hash=item3f00bea264

You would want to haggle on the price a bit.

[Nissan Kid]

Hey Guys
Im after a cheap set of 4 or 5 Muddies of what ever you have.
To be mounted to 15 Sunnies.
If you have something i might be interested in let me know.
Cheers
Matt

[Woods]

Do you care what condition they are in?

My mate may still have some when he changed over but they are rough as guts.

[Nissan Kid]

How much do you think he would be asking?
And is he local to adelaide?
Cheers

[Woods]

Hi, sorry I should've rung him first before saying anything here.

He sold them to someone else for a cheap set to play around.

Sorry NissanKid.

[Nissan Kid]

Thats okay mate.
No dramas

[CrazyDave]

Just so everyone knows, I found a pair thanks to G-Unit.

Thanks for all your help guys. :)

[Timbo]

Looking for a White Drivers door and elec mirror for a GU Patrol 1999-2000 (could be a bit above that)

Must be straight.

Melbourne East.

Cheers

[my91gq]

well ive taken pick up of my new rig and need a turbo and rock sliders to suit a gq lwb 89mdl diesel
preferably in perth and cheapish

[DX grunt]

Well done Justin. Some pics would be nice. You recovered from yr 18th yet?

[my91gq]

yeah mate was a big weekend and alot of money spent but no regrets :)

[Timbo]

Oh, I can get a door from a wrecker no probs.. but they are expensive. I've gotten 3 doors from a wrecker so far. Trying to save cashola. :)

[beckbaby04]

hi im looking for the axle weights of a 4.2 nissan patrol safrai its a 1990

[AB]

Hi Beckybaby, welcome to the forum.

I will copy this into the wanted section as well.

[AB]

Hi Beckybaby, assuming you will need this posted to Ireland yes?

[BIG RAY]

Looking to buy the plastic centre cap that goes in the centre of 17" Patrol factory GU alloy - rear wheel of course. Tried every wrecker in my area with no luck. Any assistance would be greatly appreciated.

[patch697]

Try these guys there pretty good with stuff like that.

www.smartparts.com.au

Cheers
Paul

[BIG RAY]

Contacted every wrecker in my area (Hunter Valley NSW) with out success, so any assistance would be great in finding a plastic centre cap for GU 17" factory alloy.

[BIG RAY]

Thanks very much for the quick reply Patch, I will give them call tomorrow.

[patch697]

There in Vic Ray but thay send there stuff anywhere so you should be right in that respect.

Cheers
Paul

[AB]

Go on Ebay, have a search and find some sellers of Patrol parts and email them asking the question.

http://cgi.ebay.com.au/NISSAN-PATROL-Y61-WHEEL-CENTRE-CAP-ONE-ONLY-/280546637625?pt=AU_Car_Parts_Accessories

Try this guy Ray.

[Finly Owner]

Just saw some caps on Ebay didn't check size but worth the look

[Finly Owner]

Some caps just seen on Ebay worth look

[BIG RAY]

Thanks for the info fellas bidding and watching a couple on e-bay.

[my91gq]

looking for a front drivers quater panel for a 89 gq base modle
dont no if other years are the same any help appreciated and
a glow plug relay would be a big hand aswell. if not who would sell them?

[beckbaby04]

could you please email the info

[AB]

Hi Becky, no I don't have the axle weights for you I was just asking if you need these posted to Ireland so any members that may have this know what country you are in?

[beckbaby04]

hi yes please as all the help i can get will be helpfull thanks

[my91gq]

looking for a zook for my mrs
nothing huge max tyre size of 31's
must be in good nick and in wa
if ya see any around let me no

[red92gq]

I'm searching for a GQ LWB in either a die cast model or one of the plastic airfix type models
Needed by late sept to be used for a mates wedding cake decorations.

[patch697]

I will ask a mate at a dealership if he knows where to find one for ya.

I will get back to ya tomorrow-ish

Cheers
Paul

[Nissan Kid]

Not sure about GQ's but I have seen GU's on ebay from time to time.

[Finly Owner]

Do what the kid on the commercial does. cut out ad from magazine and glue onto same shape vehicle.

[patch697]

LOLOLOLOLOL..................... You bloody clown...........lolololololol


......................Update..........

My mate in Nissan spare parts is looking into this & will get back to me asap.

[Finly Owner]

You think??? My friends say I am eccentric!

[patch697]

You think??? My friends say I am eccentric!

LOLOLOLOLOLOLOLOLOLOLOL............OK your a bloody eccentric clown..................lololololololol

[Finly Owner]

I don't have much solo hands on experience with vehicles in mechanical department. I have learnt heaps theoretically and from seeing others to do and not to do. I make the rest up with enthusiasm. And when I do something it can take a while because I will only do it the right way. And the right way to approach life is with humour, or at least the parts that don't need serious attention. I make friends easily with friendly positive people. I hide from negative people who cry why me. So lets just laugh and make a fool of ourselves by taking the P%ss out of our friends here, so they too can laugh and pick on us.

[patch697]

To bloody right mate, Gold in fact. Thats why we all get on so well cos thats just how it is here.....

We are like minded Tim........... you pore bugger............lolololol

[Finly Owner]

Must be because victorian blood flows through me. Born in carlton. Left Vic @ 8yr old never been back

[patch697]

:hijacked::hijacked::hijacked::hijacked::hijacked: Sorry I did it again....lol

Lucky Plassys not here otherwise I would have got the big.....:210:

[Finly Owner]

Yeah but we have remembered to be on the lookout for a small car to go on a boys chokky cake for his birthday,... haven't we??????????????

[patch697]

yeah but we have remembered to be on the lookout for a small car to go on a boys chokky cake for his birthday,... Haven't we??????????????

lololololololololololololololololololol That will be a bit strange for the pore bugger when thay drop hem off at the church......................lololol

[Finly Owner]

http://cgi.ebay.com.au/NEW-HO-1-87-NISSAN-PATROL-GR-4WD-/160463576316?pt=AU_Toys_Hobbies_Model_Railways
may help

[red92gq]

LOLOLOLOLOL..................... You bloody clown...........lolololololol


......................Update..........

My mate in Nissan spare parts is looking into this & will get back to me asap.
Cool thanks ,mates old girl is doing the cake an she's searched everywhere ,
Has to be a GQ ,thats the only one he will drive.

[patch697]

Cool thanks ,mates old girl is doing the cake an she's searched everywhere ,
Has to be a GQ ,thats the only one he will drive.

I recon you might be pushing for a GQ but I'll see how I go.


Cheers
Paul

[89GQ]

Hi all. Im'e wanting to replace my waterpump as ime looking around also for the thermo housing,I need the whole thing as where the bottom hose joins on its corroded. Anyone know where to get original,?? What are the ebay ones like anyone had one on for a few years???I want to do it all once,I will get Rad. Rodded aswell as new hoses etc. Cheers in advance.

[BillsGU]

I am looking for a CSA Assault 16X8 wheel to suit a GU.

I am only looking for a single wheel but would consider a set.

[Finly Owner]

Finly has been let down by voltage regulator for 12v alternator with vac pump. Can anyone help. Only driver car.:driving2:

[patch697]

external or internal Tim?

[Finly Owner]

internal...........damn it!

[patch697]

What brand alternator is it?

[Finly Owner]

something like "electrics Australia"

[patch697]

I'll see what I can find for you & if im lucky I'll PM you & make arrangements to get it up to you.

Cheers
Paul

[Finly Owner]

Have someone trying here too. So Pm b4 paying please. Thanks Paul

[patch697]

Have someone trying here too. So Pm b4 paying please. Thanks Paul

Of course mate that go's without saying.

[Finly Owner]

Paul did you happen to find anything today? I have 3 options her @ mo.

[patch697]

No not yet, still waiting to hear back Tim. I'll let you know when I do.

[Finly Owner]

no probs. thanks Paul

[Finly Owner]

Does anyone have good front and rear shocks for MQ-MK wagon lying around being suitable for factory suspension?

Yeah I know I can buy them new, just thought if someone had some in their way, and would like to exchange for a few dollars, then......let me know.:bananarock::icon_driving::bananarock:

[blsmur]

my 1985 patrol need a new taillight lens
or a matching set of tail lights
also need window winder
let me know if you got em and how much please
I live in ballarat

[Pootrazza]

Just chasing an EGR block plate for a GU ZD30?
Will pay good $$ plus posting $$

[patch697]

There is a member here selling MK parts which may suit your purpose.

http://www.nissanpatrol.com.au/forums/showthread.php?679-Wreaking-1984-MK-Shorty-5Spd-SD33T-turbo-diesel-heaps-of-goodies....

or

Try these guys thay are local to you.

www.smartparts.com.au

Cheers
Paul

[AB]

Just after an old motorbike to putt around the property and to exercise the dogs, lazy I know!!!

Needs to be cheap cheap cheap...couple of hundred bucks cheap!

Old postie, 80 model xr 80 even an old pee wee 50. If it's got 2 wheels and the engine still chugs along I'm keen!

Willing to pay extra if it comes with an old polystyrene Darwin stubby holder sticky taped to the handlebars!

Victoria - North East Region willing to pick up in Victoria area only.

[patch697]

I'll hunt around & see what I can find old mate.

Cheers
Paul

[my third 256]

why dont you just take the gasket out and trace it onto some tin /then cut it out
or go and get a new gasket and do the same
no down time
stephen

[YNOT]

I did exactly what was suggested above using a off cut of colorbond steel, took me about an hour all up. I still have the original gasket as a template, doing another blocking plate would be easy.
What's your location? (drop by introductions page and introduce yourself, we're a friendly bunch and very willing to help)

Tony

[Finly Owner]

Come for a drive and I may be able to get something for $200-$300 AB.

[AB]

Ouch, appreciate the offer Tim but thats a long drive for a paddock bike.

Would be a good excuse to travel though...lol

[Finly Owner]

There is a member here selling MK parts which may suit your purpose.

http://www.nissanpatrol.com.au/forums/showthread.php?679-Wreaking-1984-MK-Shorty-5Spd-SD33T-turbo-diesel-heaps-of-goodies....

or

Try these guys thay are local to you.

www.smartparts.com.au





Cheers
Paul


Ah hum, may I reintroduce myself?

[Finly Owner]

my 1985 patrol need a new taillight lens
or a matching set of tail lights
also need window winder
let me know if you got em and how much please
I live in ballarat

I have some MK 2nd hand. But on ebay you can get after market new ones. These are ok but fade quicker than nissan ones.
MQ are red/amber/clear MK are red/red/clear

[Finly Owner]

that's what i thuoght. Paul would tag along and we could have a mini forum family meet with tony coming over.

[patch697]

Ah hum, may I reintroduce myself?

Sorry Tim, how very absent minded of me........ It wasn't deliberate I can assure you.

[patch697]

that's what i thuoght. Paul would tag along and we could have a mini forum family meet with tony coming over.

The Mav would do it sitting on its ear but Im not doing all the driving so Andy better be good behind the wheel...lol

[Finly Owner]

infraction ur self




Heheheheeheeee

[Finly Owner]

Have bit the bullet $395 for new one. Pick up tomorrow. Beenleigh auto & marine electrical. Thanks for help anyway Paul.

This turns out to be early GQ alternator.

[patch697]

Sorry Tim I put it out there to a couple of my wrecker mates but have had no reply as yet.

I think you are taking the better option anyway in buying a new one as we use our 4x4s off road & thay have to be reliable.

Cheers
Paul

[AB]

The Mav would do it sitting on its ear but Im not doing all the driving so Andy better be good behind the wheel...lol

Trust me Pauly, I'm a great driver. You just nap in the passanger seat and leave your 4b with me...I'll look after her...lol

[Finly Owner]

so you's are coming then. It's settled. Bring swags. Now when can we expect the Mav to roll up?

[istari]

Hi folks,
I am chasing an aerial/antenna for a 1989 SWB Safari (GQ).
It is the type that mounts on the edge/corner of the passenger side front panel, next to the bonnet.
I need the whole unit - mounting head, rubber seal, mast, cable.
Aerpro only do a replacement mast or an electric unit (which requires you to still have your original mounting bracket...). I cannot find a full replacement kit anywhere...
Is there anyone wrecking a GQ where this is intact and would be willing to post to Perth.
Cheers
John

[patch697]

Trust me Pauly, I'm a great driver. You just nap in the passanger seat and leave your 4b with me...I'll look after her...lol

You'd bloody want to be.... It s the Mav & I love it to bits....

BTW that pic of me in the dress???? The 12 Gage is real................lol

[patch697]

so you's are coming then. It's settled. Bring swags. Now when can we expect the Mav to roll up?

We will have to start planning...... this sounds like it could be good.

[patch697]

Have a chat with this bloke he's a member here & he's wrecking 2 GQ's: link below.

http://www.nissanpatrol.com.au/forums/showthread.php?651-Wrecking-2xgq-patrols-cruiser-parts-TD42-Turbo-Engine-for-sale-and-a-reco-td42

If you strike out there give this mob a go: link below.

www.smartparts.com.au

Best of luck


Cheers
Paul

[istari]

Thanks Paul - I have put out the feeler sto both. We'll see what comes in.
For some reason, they seem as rare as hen's teeth - almost as bad as the little plastic mount for the rear view mirror!

[Finly Owner]

you coming over when they arrive Tony?

[Finly Owner]

Update:

Wednesday; Paid $395 for what looked different to mine. Was told how to modify after being assured that they could supply exactl same as mine.
Took it back to work. that day didn't get to do anything with it.

Thursday pull out finlys' dead alt. place side by side and work out the wire I thought was single was two in one very well tape loom. Oil fittings just need swapping. Looks good.

Today do the swap of oil fittings, fix the battery charge wire, put in alternator. Drive Finly home again. YES so happy.

Tomorrow phone auto elec and apoligise for doubting him.

[patch697]

Good to here you got it sorted Tim. Sorry I wasn't able to help you out after all that.

Cheers
Paul

[Finly Owner]

it's all cool bud! Next time maybe

[89GQ]

bump.......

[YNOT]

Have you tried this bloke?

http://www.nissanpatrol.com.au/forums/showthread.php?651-Wrecking-2xgq-patrols-cruiser-parts-TD42-Turbo-Engine-for-sale-and-a-reco-td42

Tony

[Jon]

Hello im after a set of 16 or 15 by 8 rims and tyers to suit a gq if anyones got a set thats interested in selling let me no please.

ph: 0438006397 , email: maddo3.142@bigpond.com

[Finly Owner]

let us know where u @, and your budget, and if you can pick up or arrange transport, and what you intend to use them for.

[Jon]

Im from Bendigo in victoria my patrols got a 3" inch lift with pajero alloy wheels on it which looks silly mainly because of the narrow offset so im looking for some sunraysia rims with cruiser off set i was thinking 16 by 8 or 15 by 8 and tyers im thinking 285,75,16 there abouts or 33" ,11",15" possibly a mud tyer but not to radicle as its my daily.
feel free to make suggestions

[patch697]

G/day Jon, have you given Charlton tyre service a go?

Its not to far from you & thay are cheap with a big range of tyres & Rims to.

I got my last lot of sunnys there (15 by 8) & from memory thay were around $50 each brand new.


Cheers
Paul

[89GQ]

Got the pump and housing. Theres a rubber seal on the housing do you just put rubber grease on these before install?

[YNOT]

I use a smear of silastic.

Tony

[89GQ]

I use a smear of silastic.

TonyCheers Tony. Should i use silastic sparingly on the other gaskets?i.e. Water pump, Thermo bottom housing and Thermo top housing. Cheers.

[YNOT]

I do.

Tony

[Finly Owner]

Have you tried permateks gasket sealant Tony? It's not silicone and very good on water housings.

[89GQ]

Have you tried permateks gasket sealant Tony? It's not silicone and very good on water housings.do you suggest i use this on the square rubber o ring aswel as the gaskets. The rubber one im'e refering to is number 21045J The square one. cheers

[89GQ]

Have you tried permateks gasket sealant Tony? It's not silicone and very good on water housings.Also what one do you use I went on the site and no. 97 and the new universal blue racing formula mensions waterpumps, housings etc.

[YNOT]

For me, I would use silastic on 21045J, it will help hold it in place as you install the housing. Put a bit in the o-ring recess and push the o-ring down into it. For 11072 and 21014 Permatex would be better as Tim suggested. Silastic will still work if that's what you have, but the Permatex is better.

Tony

edit; I use blue silastic. The only Permatex I've used (as far as I know there is only one type) is the one that looks like liquid vegemite.

[Finly Owner]

For me, I would use silastic on 21045J, it will help hold it in place as you install the housing. Put a bit in the o-ring recess and push the o-ring down into it. For 11072 and 21014 Permatex would be better as Tim suggested. Silastic will still work if that's what you have, but the Permatex is better.

Tony

edit; I use blue silastic. The only Permatex I've used (as far as I know there is only one type) is the one that looks like liquid vegemite.

Yeah that's the one Tony. I was put onto it years ago when I fitted V8 radiator to 6 cyl HZ

[89GQ]

For me, I would use silastic on 21045J, it will help hold it in place as you install the housing. Put a bit in the o-ring recess and push the o-ring down into it. For 11072 and 21014 Permatex would be better as Tim suggested. Silastic will still work if that's what you have, but the Permatex is better.

Tony

edit; I use blue silastic. The only Permatex I've used (as far as I know there is only one type) is the one that looks like liquid vegemite.Thanks for your help i'll have a look at repco and supadear tommrw, there's that many different ones out there!!!!

[Finly Owner]

Thanks for your help i'll have a look at repco and supadear tommrw, there's that many different ones out there!!!!

you'll get more sense from auto barn I reckon.

[89GQ]

you'll get more sense from auto barn I reckon.Yeh! True, I'll go there. Cheers

[trethus]

As the title says

pm or email

trethus@gmail.com

im in Wagga NSW.

Cheers.

[GQ4.2]

WTB: GU 3ltr Air Box

Vehicle must have been fitted with a snorkel

PM me on here

[YNOT]

Snorkel shouldn't make any difference. I had a 3ltr airbox in my GU TD42, and it didn't need to be modified to fit the Safari snorkel.

Tony

[Pootrazza]

anybody wanting to get rid of their drop arms, suited for a 4" lift give me a call 0419 656 662

[AB]

Bump It up a bit for the new members, still after my little zoomer????

Old and dodgy, thats perfect!!!

Rattles and squeks....Even better!!!

[stevec]

looking for wheels for a camper trailer,i want them same as car 1998 gu wagon.
Thanks steve

[DX grunt]

Bump It up a bit for the new members, still after my little zoomer????

Old and dodgy, thats perfect!!!

Rattles and squeks....Even better!!!

I know somebody with an old pennyfarthing lying around. Will that do? lolol

[AB]

I know somebody with an old pennyfarthing lying around. Will that do? lolol

Well I do have an old Briggs and Stratton lawn mower engine laying out the bike...I wonder if I could.....lol

[AB]

Ok, all done, thanks for that Rossco.

I did some slight mods but here's a pic below...

http://www.nissanpatrol.com.au/forums/images/imported/2010/10/1.png

[DX grunt]

Ok, all done, thanks for that Rossco.

I did some slight mods but here's a pic below...

http://www.nissanpatrol.com.au/forums/images/imported/2010/10/1.png

LOLOL Beats 35's anyday. lol

[patch697]

LOLOL Beats 35's anyday. lol

LOLOLOLOL...............onya Rossco

[old briney]

WANTED:
Long Range Fuel Main Tank to suit 2003 Patrol Wagon GU3 TD
please pm me
NSW pick up

[nassin]

hi after 4.2 petrol carby head for gq need either reco or good second hand so can just simple bolt on.
thanks

[wildgu6]

Hey buddy give this site a try. Found it very useful chasing a motor a couple of years ago.

http://www.autosource.com.au/4wd-wreckers.php

You can also find other useful links on the useful websites library in general chat.
http://www.nissanpatrol.com.au/forums/showthread.php?359-Useful-websites-library

Cheers Pete

[uted]

hi guys, I just blew up my auto but i have a 5 speed manual + transfer in my shed. (92 gq tb42e) i believe i will still need flywheel/ clutch +bolts and pedels/ booster/ master/ slave +lines. any help with these parts would be great or does anyone know were i could source them locally? ps I am new to this site so please take it easy! cheers!

[mike]

Hi guys ,Started the big strip down on my gq the other day.All going well till my mate came to help remove the windows and smashed the rear lhs side cargo window.Anyone know of a gq being wrecked or wrecking one ?Preferably in sa or prepared to ship .Obviosly after the window but also a few other bits if available.Local wreckers want $195 even nissan only want $225 and thats ex japan windscreens obrien wanted around $450.

Cheers Mike

[kopyme]

I have some .. not all... just if you have no luck finding them..

Cheers,

Sandy

[DX grunt]

I'm looking at putting lights on top of my Ute's cab and need a single roof rack to support 4 lights. Any suggestions on the brand of rack to accommodate the lights and wiring?

Ross

[Jerry]

I am looking for 2 front seat covers from Escape Gear. It is for my 2007 Patrol. I can't really find a distributor on the Europe continent. The Escape Gear website does not facilitate an online shop.

Anyone some tips about an online store or a ditributor near Holland (France, Belgium, Germany)

Thanks

[NissanGQ4.2]

try the dealer locator on this website http://www.blackwidow4wdstorage.com/
couldn't find an online shop, just email the closest location to you and see if they can help you out

cheers

Todd

[Bloggsy]

G'day Jerry,

I saw these guys http://www.outback-import.com/home.php advertising in a couple of 4x4 magazines I picked up on the way to the Netherlands a few months ago. Looks like they are based in France and import quite a few things, so they might be able to help.

Cheers,
Darren

[macca]

I'm after a DX drivers or a ST passenger seat
I have a feeling these are a hard to find item, seems to be a popular mod
Colour doesnt matter as MSA canvas covers will be fitted.
Macca

[seaveiw]

i an chasing a front left door in good condition colour not important as mine has rusted out and the hinge wont bolt to the door

[Matt_94GQ]

HI,

I am after a 2nd hand turbo kit to fit a Patrol TD 4.2 Y60.
WA area, if anyone has one for sale please let me know.

My Patrol has done 530K and not really keen on spending up to 5K on a new kit.

Thanks

[gf0012-aust]

I've got a roadworthy coming up and need to get some bits and pieces - minor cosmetic stuff

Its for an 89 LWB mav

LH rear door trim

door handle plastic surround trim.

Bonnet support rod clip (for when the bar is lying down)

Bonnet stops

LH Front seat plastic trim (near LH side of base of the seat)

[b-r4d]

Hey guys,
This is one of my first posts so please excuse me if i get it wrong. Just bought a projct 4.2 diesel GQ wagon. Blown motor, and missing turbo and manifold. Just chaising the following parts.

*TD42 turbo &/or manifold
*TD42 head
*TD42 complete engine
*Steel bullbar
*Snorkel

Thanks guys,
Just PM or post if you have any of these items, and i will get back to you quite quickly.
Brad.

[Finly Owner]

Have you been in touch with Bega Rd wreckers?

[b-r4d]

no i havnt, do they do a fair bit of patrol stuff?

[Finly Owner]

yep he also owns patrol comp trucks
Tim

[macca]

Need a set for my road tyres, Muddies are too noisey and expensive on sealed roads :icon_bonk:

PM phone number & i'ii ring you

Macca

[AB]

After the forum meet up I have decided that there is no chance that I can save money anytime soon to get my GQ so have extended my home loan...YAY....More debt...lol

Anyways, good news is that I'm now on the hunt!

I'm after a GQ 4.2L LWB (7 seater) turbo diesel manual wagon.

Ideally around 250-300km's would be great.

Don't care about colour, don't mind a few battle scars, etc but preferably minimal rust.

Would love to find a stock family car that hasn't had a hard life or possiby some mods from a responsible driver if it comes up would be a bonus.

I'll be watching Ebay, carsales and trading post like a hawk but if anyone see's any on their travels then let us know, that would be great!

Victoria based but can travel to NSW, SA and TAS if something good comes up.

Appreciate any help guys and girls.

My limit is 8k so I may be on the hard to find at that price category but I'll see how I go...Thanks!

[nassin]

thanks wild 98 great sights

[kopyme]

got one if needed... in melb so would need to freight...

cheers
sandy

[GU 2.8]

found thanks

[Jerry]

Pfff what a horrible web site. Let's say the French way :-). Thanks anyway for the tip. I'll keep on searching.

[macca]

I'm having a hard time sourcing some of these rims and have a feeling there is a difference between cab chassis and wagon, is this so?
The 2 types I have seen have oval or square holes, does that make any difference? or is it model runs?
They dont seem to follow years, I don't know..... a bit confused.
Most are in Vic or Qld which is a bugger as I'm along way from there.
Thanks for any advice
Macca

[YNOT]

The small hole wheels (round hole) are the heavy duty wheels that were fitted to leaf sprung GU utes. The big hole (square hole) wheels were fitted to coil sprung utes and wagons. If you have a leaf sprung ute then best stick to small hole wheels.

Tony

[macca]

Thanks Tony, that is valuable info.
Will refine search to the round hole jobbies
Macca

[ilikedonuts_10]

Hi all,

I am looking for one of those ALDI winches.

Does anyone have any un-used ALDI winches?

[AB]

personally I would steer clear of the Aldi winches. Not sure what they are like now but my brother bought one a while back and they had no brake/clutch mechanism so if your pulling up hill and let go of the trigger you came back down again.

Maybe they have changed now but I would pay the extra and get reasonable good quality brands IMHO.

[Woof]

Hi all,

I am looking for one of those ALDI winches.

Does anyone have any un-used ALDI winches?

Why worry about the winch mate, you got your 25 posts and the manual you were after....
I was just not quick enough.

[Jas]

Hi Everyone,

I,m looking for a patrol I live in Maryborough qld if anyone knows of any in or around this area, it would be much appreciated to give me a heads up as there is not to many around in the condition I would like them to be in.

Thanks

Jason

[turborooster]

looking for a zd30 airbox lid for a gu

[Woof]

Always a good idea to post up an introduction before asking for anything mate, just helps get everyone on side.

[ripper]

Have any of you guys got a GQ jack handle and wheel brace you want to get rid of?

[turborooster]

sorry mate my bad

[cleetus]

hi all im after a drivers side door for my mq preferably a gq dooras passengers side is gq im from east melbourne

[Bigrig]

Have you rung around the wreckers locally?? Try Patrolapart in Melbourne and Nizzbits (PM him - he is on the forum) also as they may have something.

[cleetus]

thanks yeah been to patrolapart they didnt have one but def will try nizzbits

[Bob]

I need front right and back right mudflaps for my 98 gu
will take whole set if necessary

[Bigrig]

Hey mate - PM 'Nizzbits' from the forum and he may be able to assist - otherwise (apart from wreckers etc) try Patrolapart in Melbourne (www.patrolapart.com.au).

[zuluwoffle]

Thanks for the link Big Rig. I've added that one to my favourites :D

[NFG4X4]

Hi guys I got a tabor (by warn) winch and the clutch lever snapped, if your familiar with tabor winches they are a pathetic cast switch that gets britle and snaps, anywho any warn winch lever will fit as they are the same gearbox so if anyone has any old buggered winches or just a lever spare please shout out as a I need my winch ova the new year period! Cheers guys best to txt 0433 597 532

[turborooster]

forgot to tell u 2day, but try mal leslie he does alot of stuff with warn winches

[Finly Owner]

Well thought I'd see if any one had a SD33T laying around to suit rebuild, or even a good runner. Would consider good running SD33. Obviously the closer to me the better.
If anyone can help, please PM me.

Thanks Tim

[im2xtreem]

G'Day all,

I'm after a GU jack handle for the original jack. I have the long shaft with the hook that goes into the jack but not the bit that attaches to that. Or maybe I do and just cant find it in my truck???? If ANYONE can tell me the where abouts of this missing part I will have a good hard look (thought I had but who knows?) and if anyone has one to spare could they please let my know!

CHEERS
Shayne

[DX grunt]

G'day Shayne.

You tried any wreckers?

Ross

[Bigrig]

And try www.patrolapart.com.au also mate if no luck with the wreckers. They do wrecks as well as reconditioned and new, and specialise in Patrols, so you may have some luck (even if they can point you in the right direction). Good luck with it.

[macca1]

G'Day all,

I'm after a GU jack handle for the original jack. I have the long shaft with the hook that goes into the jack but not the bit that attaches to that. Or maybe I do and just cant find it in my truck???? If ANYONE can tell me the where abouts of this missing part I will have a good hard look (thought I had but who knows?) and if anyone has one to spare could they please let my know!

CHEERS
Shayne

Hi Shayne, Maybe you have overlooked the wheel brace, it doubles as a handle

Cheers Macca :1087:

[patch697]

Hi Shayne, Maybe you have overlooked the wheel brace, it doubles as a handle

Cheers Macca :1087:

lolol........You just beet me to it...

^^^^^^^^^^ What he said................... in the middle if the wheel brace is the spot for the rod, or is this what your after???

[im2xtreem]

LMAO...Yep, this is the part im after! I have a star wheel brace because there wasn't one in the car when I bought it...should have checked hey. Thanks guys for your replies, I will keep trying the local wreckers in hope of finding one.

CHEERS
Shayne

[mike]

Hi After the grey trim off the rhs rear barn door ,anyone got one .

Cheers Mike

[patch697]

LMAO...Yep, this is the part im after! I have a star wheel brace because there wasn't one in the car when I bought it...should have checked hey. Thanks guys for your replies, I will keep trying the local wreckers in hope of finding one.

CHEERS
Shayne

I may have one .... will get back & post here in a day or 2.

[beemer]

Hi everyone, I'm looking for a winch bar to suit a 98 gu 2.8 td, also a roof rack. If anyone in qld has one please let me know.

[Bigrig]

Have you tried the wreckers? Or www.patrolapart.com.au ?? I've left my details with the 'wreckers hotline' for some parts I'm after, and there is about 40 of them in the grid, so once something comes in, they call you and it's a rat race to get there first (but does save some hunting around) ... good luck with it.

[beemer]

Thanks Rig, I'll give it a shot

[wormy]

does ne one have one ??

[Harvey]

Hi, I'm after a 5 or 6 inch lift kit for my GU Patrol.

You can contact me on 0431 331 931 or via the site.

Thanks heaps.

[NissanGQ4.2]

Hi, I'm after a 5 or 6 inch lift kit for my GU Patrol.

You can contact me on 0431 331 931 or via the site.

Thanks heaps.

Hi mate , post an intro up in the intro section, more members are likely 2 help out if u post an intro up about urself and ur rig

Cheers

Todd

[Finly Owner]

ahhhh yeah..... are you coming to look?

[Smokaharma]

As per title in or close to bris as cheap as possible or free would be better :clapping: I will pick up and remove if need be

[mad mick]

hi to everyone looking for drivers side door for mq with no rust? let me know what you have

[wormy]

hey all just after sum big tyres for me ute but not looking to spend alot just enough for rego cheers

[MQ MAD]

Just check that 33"s are legal in QLD before shelling out the $$$

[Finly Owner]

I am chasing a complete air filter housing for the secondry air filter for SD33 motor. Someone removed the original from Finly before I bought it. And it only has primary housing and filter.

Thanks Tim

[MQ MAD]

So your chasin the one thats mounted to the firewall ???

[YNOT]

The air filter that sits on top of the engine is what he needs.

Tony

[Finly Owner]

I spoke and my lips didn't move????????????????? heheheheeee

[MQ MAD]

Thats cool,just seems odd that one is missing
Many flick the other one

[Finly Owner]

Thats cool,just seems odd that one is missing
Many flick the other one

So you got 1?

[MQ MAD]

No sorry
Not a spare anyway any i have are still on running motors
Ill do some diggin 4 ya

[AB]

Kris drove down from ACT and stayed lastnight. Helped him this morning load the wood heater that he bought off Ebay in town and on the way home I saw a Garage Sale...lol

Well I could'nt believe my eyes. There was an old Yamaha TY 250 (trials bike) for sale....I just picked up for $100!!! Bargain...lol

These are the old trials bike, notice the rock crawlers...lol

1613

[Maxhead]

Kris drove down from ACT and stayed lastnight. Helped him this morning load the wood heater that he bought off Ebay in town and on the way home I saw a Garage Sale...lol

Well I could'nt believe my eyes. There was an old Yamaha TY 250 (trials bike) for sale....I just picked up for $100!!! Bargain...lol

These are the old trials bike, notice the rock crawlers...lol

1613


Good score mate!! Bargain

See there was a reason for going into town, not just to help me out...lol

[Finly Owner]

You'll be able to ride into mud hole to bring in Snatch strap now.

[Finly Owner]

appreciate it

[AB]

You'll be able to ride into mud hole to bring in Snatch strap now.

not a bad idea...haha

Yeah Plassy the gear ratios are so low. 1st is like 1st gear low on a 4wd...lol....I took it up steep hill yesterday and it just crawled up no problems.

My misses laughed and called me an idiot when I turned up to the house with it yesterday...lol....I had no response!

[NissanGQ4.2]

Well I could'nt believe my eyes. There was an old Yamaha TY 250 (trials bike) for sale....I just picked up for $100!!! Bargain...lol

These are the old trials bike, notice the rock crawlers...lol


Top score, if i had seen that for 100 bucks it would of came home with me, that's for sure

[my third 256]

tim found this one on ebay but be quick it might fit
stephen
NISSAN PATROL AIR FILTER BOX

[Finly Owner]

tim found this one on ebay but be quick it might fit
stephen
NISSAN PATROL AIR FILTER BOX

Wrong one thanks

[Ben-e-boy]

If you really get stuck i have a td42 one if you want to modify it. you can have it its only sitting in the shed

[Ben-e-boy]

Hi all

I'm chasing a set of 35 inch muddies must have some tread does not have to be on rims

Cheers
Benny

[Finly Owner]

It's all good. Will wait for original as primary filter more than secondary anyways.Thanks for the offer.

[Cameron]

Hey guys I'm Cameron
I was just wondering if anyone knew where to get the one piece rear windows to replace the sliding ones any info would be a great help
Thanks

[patch697]

Welcome on board mate, I cant help with this but there will be someone who can.

Jump on the introductions section & post up an intro of yourself mate. We are a bit of a stickler for ceremony here & it will give us a chance to get to know you & for you to get to know us.

[Cameron]

sorry should tell you what partol i have haha ot's a 11/96 GQ LWB 30th ann. 4 door

[MS29431]

The original exhaust mainfold has cracked rather than peplacing it with a standard one i'd much rather put extractors on it

[mike]

Patroldocta ones are sh!t !!PM me

[Finly Owner]

sold mine with first shorty

[MS29431]

DAMN!!.. Do they come up around the traps 2nd hand much?? or hard to find?
Or can u get 'em new

[MQ MAD]

2nd hand come up ,but not often
Theres a set in QLD but the bloke is chasin $100
Let me know if thatll help ya,ill send you his number

[MQ MAD]

The MQ/MK solid rear windows will fit the GQs

[YNOT]

2nd hand come up ,but not often
Theres a set in QLD but the bloke is chasin $100
Let me know if thatll help ya,ill send you his number

Where in QLD are they? If they're nearby I could pick up if that helps.

Tony

[MQ MAD]

There out in the Gatton/Granthom area
I thought of them myself,but wont fit the Turbo motor

[YNOT]

That's not too far away from me. The problem could be getting access, that area was hit hard by the flash flooding a few weeks ago, and access is still limited. If I can help here I will.

Tony

[Finly Owner]

There out in the Gatton/Granthom area
I thought of them myself,but wont fit the Turbo motor

That's a Bugger

[trackmaster]

Im after a GU tow bar and hitch im in Sydney cheers.

[Woof]

Hey Trackmaster its always a good idea to post up an introduction before asking any questions mate, just gets everyone on side.

[YNOT]

Found one, check this thread. Thanks Ripper.

http://www.nissanpatrol.com.au/forums/showthread.php?2580-Just-saw-a-GU-towbar-for-120

Tony

[trackmaster]

Cheers for that Tony il check it out.

[trackmaster]

Thanks dogman cheers.

[Woof]

Thanks dogman cheers.

No worries mate, its always great to meet new members here..............sometimes we all just forget to post the intro:cheers:

[Finly Owner]

I know a bloke wanting a reliable cheap SD33 running
give us a yell if u hav 1.

Tim

[Boagie]

hey guys i have a 99 gu ute 4.2 (non turboed)--i am chasing a set of steps and a grab handle that goes on the front pillar (brownish/tan in colour--)will freight if any good--cheers

[wildgu6]

Hey Boagie, sorry cant help on that one but welcome aboard mate,
Great bunch of people with a s*** load of knowledge, experience and adventures to share.
Plenty of good laughs along the way as well.
Surf around and join in where ever you feel comfortable.
You should be able to find something around here somewhere.
http://www.autosource.com.au/4wd-wreckers.php

Good luck, Welcome aboard and Enjoy the ride.
Hope you have a great 2011.
Happy trekin buddy, stay safe

Cheers Pete

[patch697]

I've moved your thread here Boagie so its in the right section & that way you will get the best response.

[Bigrig]

Hey boagie

I'm getting rid of my sidesteps in the next month or so for rock sliders - they are on a gq, so not sure of how they'd go on yours but if you want them, you pay the freight and they're yours mate. Have a look at them I'm my members ride thread - I only sanded them back and cleaned them up a couple of months ago.

Cheers

Scotty

[MADCOW]

After snagging the wiring loom for the drivers side lights in the rear bumper does anyone have one they would like to get rid of? Happy to pay a fair price for it also.

I should add it is off a GU111.

I have bodgied mine back to gether but with a few earthing issues

Cheers Dave

[AB]

Rare as hens teeth but worth a try.

If anyone has a set of solid rear windows for GQ/MQ/MK then please PM me.

I'm based in north east vic but don't mind travel or postage.

Cheers!

[patch697]

Im on it AB I know where theres one sitting so I'll go have a look.

[AB]

Im on it AB I know where theres one sitting so I'll go have a look.

You little ripper Pauly.

Peeled back the trim inside and rust is starting to eat so I want to get on to this, cut it out, new plate and solid windows.

Legend!

[Boagie]

cheers scotty--bloody kind of you to offer--but apparently they wont fit my ride--i will do some more research though!!1--once again you are too kind mate

[Boagie]

hey guys just chasing a set of side steps(cheap alloy ones)or decent ones to suit my 99 gu cab chassis--i am also chasing the front grab handle that goes on the front pillar(brown /tan in colour)--and if you are in the west--a passenger side bucket seat and a centre console--cheers:o:o

[DX grunt]

Sorry bloke,

Can't help you with anything, but looking forward to seeing your mods.

[Boagie]

cheers mate--i will take some photos shortly--i should of taken some before photos----she was a little sad--but i have spent probably every day for the last month doing something to her!!!!!

[AB]

Keep your eye on Ebay mate, I have seen them pop up on there and sell very cheap!

[nowoolies]

Hi Boagie
i have a set of alloy side steps for sale
ill take a couple of pics later to day and put them up for you to look at
cheers nowoolies
Paul

[nowoolies]

hope these work
let me know what you think
cheers mate
Paul

[Clunk]

have you tried looking on gumtree.com.au? you could also put a wanted add on their, or quokka online.

[Boagie]

cheers for the photos mate--they are off a wagon eh?---is it a gu ?just wondering if they would fit my ute.--my ph no is 0427922999--if ya want to text me aprice--cheers chris

[GUte]

These are what I took off before adding sliders. Bit banged up and one of the brackets has pulled through the alloy underneath the step.
Not sure what they're worth, make an offer?

http://i49.photobucket.com/albums/f253/In_Elysium/4x4/e8bc3109.jpg

:)Oh by the way, the drawers they're sitting on needs to go also :)

[Boagie]

would ya take $50 for them?--