Rear door table

[whippet]

Does anyone know if you can still get a rear door table for the patrol?

[nowoolies]

g`day whippett
i have seen rear door tables at BCF and at Ranger camping stores if thats any help
i would have a look then go home and make one
would be as easy as
nowoolies

[the evil twin]

M series, GQ or GU cobber?

Seen lots of very nice DIY ones on M and GQ's

The GU's are a bit trickier due to the different trim and door shape. I cheated and have the fridge on the left and the "unused" fridge slide on the RHS drawer becomes a pull out table

Don't know of any commercially available tables specific to Patrol models but might be some out there

[whippet]

thanks guys i have a gu. Black widow use to make them, they stopped because there wasn't a market for them. I think your right nowolies check one out and make it myself.

[Bigrig]

Hey Kelvin - don't you have one of these on the back of yours??

[YNOT]

Here's one a friend of mine made for his GU.

Tony

[big_fletch]

That's a real neat job your mate did tony, I give him top marks on that!

[Sir Roofy]

that is a very neat job i find that cooking on these is not suitable
even on a low flame.
great for bread and butter and preping

[Finly Owner]

Tailgate is built in table.

[Dark 1]

Check my members ride thread mate, built one myself for about $60.
My Tuf 42 GU.

[gec]

I made me own only cost about ten bucks for the tie down thingy's, we even cook on it.

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090001.jpg

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090002.jpg

[DX grunt]

I got the BCF one. I'll post some pics in the morning.

Ross

[MADCOW]

I made my own out of some scrap stainless, It did cost me a slab to get it folded and piano hige spot welded. It is big enough to fit a portable bbq. Door is held via a nutsert fitted behind the splashback with s/s wire holding it in place when down. I also put some pinchweld to stop the metal to metal contact and rattle

IMG]http://i40.photobucket.com/albums/e250/charldav/IMGA0841.jpg[/IMG]

IMG]http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg[/IMG]

[MADCOW]

http://i40.photobucket.com/albums/e250/charldav/DSCN5577.jpg

http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg
take 2

[Bigrig]

http://i40.photobucket.com/albums/e250/charldav/DSCN5577.jpg

http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg
take 2

LOVE the stainless!! Looks f'ing awesome.

[DX grunt]

Hey Whippett.

I got this from BCF discounted because I’m a member.

http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable001.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable002.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable003.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable004.jpg

Ross

[Finly Owner]

handy Ross

[Finly Owner]

I made me own only cost about ten bucks for the tie down thingy's, we even cook on it.

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090001.jpg

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090002.jpg

It works, don't it

[cossy]

Hi yont Tony
Can you get some more some pic your mates?

[NissanGQ4.2]

Hey Whippett.

I got this from BCF discounted because I’m a member.

http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable001.jpg

Ross

Looks exactly like the Tyre step I have 2 reach the roof rack i don't have, never would of though about using it as a table.

[YNOT]

Hi yont Tony
Can you get some more some pic your mates?

These are the only other photos I have at the moment but he only lives 10 minutes down the road from me so I can get more if you want them.

He replaced the original door panel with 12mm MDF so it would be flush when closed, and covered it in trunk liner.
The table top (I think it's also 12mm MDF) is covered in lino and edged with aluminium angle.

Tony

[NissanGQ4.2]

just found this one

http://www.trektable.com.au/suitable%20vehicles/Nissan%20Patrol%20GU.htm

[cheese]

hmmm, might have to invest in one of these soon! looks very useful to prepare food and other stuff.

[Maxhead]

Here's one a friend of mine made for his GU.

Tony

Mate of mine has something very similar. I think he made his for around $80 and all quality bits

[wildgu6]

These are the only other photos I have at the moment but he only lives 10 minutes down the road from me so I can get more if you want them.

He replaced the original door panel with 12mm MDF so it would be flush when closed, and covered it in trunk liner.
The table top (I think it's also 12mm MDF) is covered in lino and edged with aluminium angle.

Tony
Nice clean job Tony, I like it and it looks quite sturdy. top marks




I got this from BCF discounted because I’m a member.

Ross

Nice one Ross, might have to spend a bit more time at BCF. thats a pearler as well, and so simple.
Suits me fine.... and also a member.

Cheers buddy

[wildgu6]

just found this one

http://www.trektable.com.au/suitable%20vehicles/Nissan%20Patrol%20GU.htm

Great link buddy, cheers

[big_fletch]

I was going to make a rear table out of stainless but that one that you posted up tony looks so neat and tidy I'm almost tempted to copy it.. its also a hell of a lot cheaper lol