PDA

View Full Version : Rear door table



whippet
1st March 2011, 04:14 PM
Does anyone know if you can still get a rear door table for the patrol?

nowoolies
1st March 2011, 04:57 PM
g`day whippett
i have seen rear door tables at BCF and at Ranger camping stores if thats any help
i would have a look then go home and make one
would be as easy as
nowoolies

the evil twin
1st March 2011, 04:58 PM
M series, GQ or GU cobber?

Seen lots of very nice DIY ones on M and GQ's

The GU's are a bit trickier due to the different trim and door shape. I cheated and have the fridge on the left and the "unused" fridge slide on the RHS drawer becomes a pull out table

Don't know of any commercially available tables specific to Patrol models but might be some out there

whippet
1st March 2011, 07:44 PM
thanks guys i have a gu. Black widow use to make them, they stopped because there wasn't a market for them. I think your right nowolies check one out and make it myself.

Bigrig
1st March 2011, 07:51 PM
Hey Kelvin - don't you have one of these on the back of yours??

YNOT
1st March 2011, 07:59 PM
Here's one a friend of mine made for his GU.

Tony

big_fletch
1st March 2011, 08:06 PM
That's a real neat job your mate did tony, I give him top marks on that!

roofy
1st March 2011, 09:01 PM
that is a very neat job i find that cooking on these is not suitable
even on a low flame.
great for bread and butter and preping

Finly Owner
1st March 2011, 11:42 PM
Tailgate is built in table.

Dark 1
1st March 2011, 11:54 PM
Check my members ride thread mate, built one myself for about $60.
My Tuf 42 GU.

gec
2nd March 2011, 02:36 AM
I made me own only cost about ten bucks for the tie down thingy's, we even cook on it.

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090001.jpg

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090002.jpg

DX grunt
2nd March 2011, 06:29 AM
I got the BCF one. I'll post some pics in the morning.

Ross

MADCOW
2nd March 2011, 12:53 PM
I made my own out of some scrap stainless, It did cost me a slab to get it folded and piano hige spot welded. It is big enough to fit a portable bbq. Door is held via a nutsert fitted behind the splashback with s/s wire holding it in place when down. I also put some pinchweld to stop the metal to metal contact and rattle

IMG]http://i40.photobucket.com/albums/e250/charldav/IMGA0841.jpg[/IMG]

IMG]http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg[/IMG]

MADCOW
2nd March 2011, 12:56 PM
http://i40.photobucket.com/albums/e250/charldav/DSCN5577.jpg

http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg
take 2

Bigrig
2nd March 2011, 12:57 PM
http://i40.photobucket.com/albums/e250/charldav/DSCN5577.jpg

http://i40.photobucket.com/albums/e250/charldav/DSCN5576-1.jpg
take 2

LOVE the stainless!! Looks f'ing awesome.

DX grunt
2nd March 2011, 04:50 PM
Hey Whippett.

I got this from BCF discounted because Iím a member.

http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable001.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable002.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable003.jpg
http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable004.jpg

Ross

Finly Owner
2nd March 2011, 10:46 PM
handy Ross

Finly Owner
2nd March 2011, 10:47 PM
I made me own only cost about ten bucks for the tie down thingy's, we even cook on it.

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090001.jpg

http://i327.photobucket.com/albums/k452/BeniMan_08/2008_11090002.jpg

It works, don't it

cossy
4th March 2011, 07:08 PM
Hi yont Tony
Can you get some more some pic your mates?

NissanGQ4.2
4th March 2011, 08:06 PM
Hey Whippett.

I got this from BCF discounted because Iím a member.

http://i1015.photobucket.com/albums/af279/DXgrunt/Tyretable001.jpg

Ross

Looks exactly like the Tyre step I have 2 reach the roof rack i don't have, never would of though about using it as a table.

YNOT
4th March 2011, 08:14 PM
Hi yont Tony
Can you get some more some pic your mates?

These are the only other photos I have at the moment but he only lives 10 minutes down the road from me so I can get more if you want them.

He replaced the original door panel with 12mm MDF so it would be flush when closed, and covered it in trunk liner.
The table top (I think it's also 12mm MDF) is covered in lino and edged with aluminium angle.

Tony

NissanGQ4.2
4th March 2011, 08:15 PM
just found this one

http://www.trektable.com.au/suitable%20vehicles/Nissan%20Patrol%20GU.htm

cheese
4th March 2011, 08:48 PM
hmmm, might have to invest in one of these soon! looks very useful to prepare food and other stuff.

Nisshead
4th March 2011, 08:56 PM
Here's one a friend of mine made for his GU.

Tony

Mate of mine has something very similar. I think he made his for around $80 and all quality bits

wild98
6th March 2011, 12:12 AM
These are the only other photos I have at the moment but he only lives 10 minutes down the road from me so I can get more if you want them.

He replaced the original door panel with 12mm MDF so it would be flush when closed, and covered it in trunk liner.
The table top (I think it's also 12mm MDF) is covered in lino and edged with aluminium angle.

Tony
Nice clean job Tony, I like it and it looks quite sturdy. top marks




I got this from BCF discounted because Iím a member.

Ross

Nice one Ross, might have to spend a bit more time at BCF. thats a pearler as well, and so simple.
Suits me fine.... and also a member.

Cheers buddy

wild98
6th March 2011, 12:14 AM
just found this one

http://www.trektable.com.au/suitable%20vehicles/Nissan%20Patrol%20GU.htm

Great link buddy, cheers

big_fletch
6th March 2011, 12:19 AM
I was going to make a rear table out of stainless but that one that you posted up tony looks so neat and tidy I'm almost tempted to copy it.. its also a hell of a lot cheaper lol