Mounting Amada Extremes

[paulyg]

Hey Guys, Just looking for Ideas on mounting the remote reservoirs on the Amada Extreme Shocks.

[MudRunnerTD]

Front or back?

[megatexture]

Fitting instructions on there site, Here is how I did mine very simple http://www.superiorengineering.com.au/files/File/Amadaxtreme-patrol-fitting%20wat.pdf

[paulyg]

The fronts look easy, just looking to see what others have done with the rears.

[megatexture]

The rear is very easy all you need is two tek screws and a cordless with appropriate bit and they are tucked up out of the way there.

You might need to zip tie the braided line away from the exhaust also

[paulyg]

Thanks guys

[Ben-e-boy]

I wilo add that you should not cable tie hose to the shock body too close to the banjo fitting. This can and HAS caused them to leak and it will not be covered by warranty

[HuskyInAuz]

Rears..
From last month, sorry only one photo.. three from the front if you need those ;)
47292

[megatexture]

I wilo add that you should not cable tie hose to the shock body too close to the banjo fitting. This can and HAS caused them to leak and it will not be covered by warranty

Mine was tied on inner side of the chassis rail so little more than half way from the fitting, I was probably just being fussy but it looked like with the slack it may swing close to the exhaust on corrugations etc