PDA

View Full Version : Sway bar link question



NP99
1st September 2013, 11:17 PM
Guys these come without a grease nipple, so do you drill and attach on or pull the boot apart to grease?

MudRunnerTD
1st September 2013, 11:50 PM
So you have bought them and in the package was 2 grease nipples? Or they are listed with grease nipples?

I don't think they are suitable? Never seen them with grease nipples before??

menace 2
1st September 2013, 11:51 PM
they are just a sealed unit like some tie rod ends...dont pull the boot from its lip...the grease will stay in there ..if it is coming out from the boot at a later stage then get a new one....I think they are better like that because most people over grease and force it out from under the boot....I believe it is stuffed once you do that because now the s#*t can get in and wear it....just re-read your post....is there a threaded hole in the end of them , but no grease nipple to put in it ??

yeh they sell them on ebay with grease nipples in them TD

NP99
1st September 2013, 11:57 PM
Thanks guys, no nipples in the packet and no hole. Just looked like the boot should have been able to pack with grease. It's all a sealed unit. They are what they are I guess. Cheers