Is it possible?

[GrumpyOldFart]

To set the scene, I have a 2004 (early) GU DX ute. I can get real cheep a 2004 GU ST wagon with cruise, power windows, central lock, seats door trims, switches, etc.

Both have 4.2 turbo i/c motors and manual boxes (well the wagon has had all running gear removed. The wagon was a rollover write-off.

From the service books I downloaded I think that the 04 utes had wiring for power windows and central lock, just need the bits and relays. They never had cruise as an option.

I have to take my dash out to change the heater box so do I swap the dash wiring loom while I'm at it to get factory cruise? Or wont it work?

Ta for any feedback:feedback:

Dru

[MudRunnerTD]

Hey Dru,

Pm Yendor with a link to this question mate, he will be your man for sure.

[GrumpyOldFart]

Well, the short answer with my 2004 ute is NO.
Only speaker wires in the dash loom to the doors!

I am now removing the wires out of the ST loom to make my own power window and power mirror kit.

On a positive note I now have bucket seats, console, carpets, lighter grey ST dash and plastic bits, oh, and replaced heater....no leaks now!

Dru