Inner wheel arch gaurds

[Boomtiki]

Hi guys, I'm obviously useless at this as I thought I'd looked everywhere & tried everything but I can't find info on what the plasitc gaurds are called & where I can buy some for the front inner wheel arches of my GUIV Patrol.
I saw in some posts where there was talk about the rubber sheets/gaurds but they're not the ones I'm chasing. The ones I want are a moulded plasic gaurd that protects the inner wheel gaurd from damage. Any help is much appreciated.
Cheers,
Mark.

[Clunk]

Try Nizzbits or Patrolapart, bother vendors on here.....

Don't slap it, tap it!!!!

[NP99]

Just curious, what happened to the originals?

[threedogs]

Not sure which bits you need ,but if just the verticle skirts ,use insertion rubber from Reece plumbing or similar.
It' 1/8th thick and very tough, used for big gate valve gaskets. 101 uses on a 4x4 and not bad on price too.

Or go to a 4x4 shop and use offcuts from TUB liners TOUGH AS

[NP99]

For the rubber skirts I used Clarkes rubber......still need to pull the old ones off and template them up.

[Boomtiki]

Not sure, it came that way when i bought it 2 years ago. It was a mine car so the underside has required a bit of TLC, just don't want mud settling in the panels & causing rust.