Intercooler rubber mounts needed

[Stokezi]

Hi all l am after the rubber mounts for a zd30 intercooler if anyone has some to sell or if anyone knows who sells them that would be great as l have not had much luck finding any

[megatexture]

I'd go to a wreckers

[Stokezi]

No luck with local and surrounding wreckers yet going to extend my search via phone this weekend QUOTE=megatexture;358840]I'd go to a wreckers[/QUOTE]a

[mudski]

I got some rubbers from Clarke Rubber. Like the rubber wiring grommets. Worked and fitted fine.

[megatexture]

Try Clark rubber and see if they have some rubber grommits that might fit ?...

Beat me to it lol

[Stokezi]

It's the rubber mounts that the bolts go through to hold the intercooler in place so it doesn't vibrate ,missing just 1 so do u think clark rubber would have that

[mudski]

It's the rubber mounts that the bolts go through to hold the intercooler in place so it doesn't vibrate ,missing just 1 so do u think clark rubber would have that
You will find you will have to replace all of them so they are the same. The CR ones are different to the OEM rubbers but still work fine.

[megatexture]

These the ones you used mudski http://www.clarkrubber.com.au/wiring-grommet.html

[threedogs]

May be even able to use some soft poly block from CBC bearings and just drill hole in centre.

[mudski]

These the ones you used mudski http://www.clarkrubber.com.au/wiring-grommet.html
Yeah something like that. I actually took my IC into CR to get the sizing right. For under $10 I had new mounts.