GU Bullbar LED blinker/park lamps

[Big Red]

So the smashed blinkers in Big Reds bullbar probably needed changing rather than fixing so i bought some "L.E.D. autolamps 175AW" lamps to replace them.
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/78.jpg

also bought a "Tridon HD13" electronic flasher to stop the "flashes too fast" problem.
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/79.jpg

put it in Big Red [in case you don't know its a 99 GU Patrol Ute] before i fitted the lamps and the fuse blew.
tried another Tridon HD13 in MissRed [in case you don't know its a 00 GU Patrol Ute] and it blew the fuse there also.

The new 3 pin flasher cans plugged straight in to the existing plug but is not compatible with the wiring and no others i could find were compatible either.
will have to rewire it i guess.

original Tridon EP34
http://imageshack.us/a/img37/7840/guflasherzep34cir.jpg

electro mechanical type to suit LED's

Tridon HD13 suits 1 to 6 25w globes
http://imageshack.us/a/img69/9288/guflasherzhd13cir.jpg

Tridon SD13 suits 1 to 10 25w globes
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/80.jpg

[Big Red]

The offending Bullbar blinkers.
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/81.jpg

Undo two screws to remove the unit
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/82.jpg

The mounting holes are about 1/2 a hole out
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/83.jpg

It is a simple matter to elongate the holes but you could probably just force it in the original holes anyway
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/84.jpg

[Big Red]

Mount the backing plate
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/85.jpg

The module clips on securely and is sealed so no need for silicon
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/86.jpg

I just used standard insulated spade terminals to plug it in
white [earth] goes to the vertical terminal on the right hand side
brown [parker] goes to the top horizontal terminal
yellow [blinker] goes to the bottom horizontal terminal
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/87.jpg

[Big Red]

The flasher is clipped to a metal rail behind the edge of the centre dash section.
It was a simple matter to make some jumper cables for the wiring of the flasher to flasher plug and swap the green and black wires over.
http://www.nissanpatrol.com.au/forums/images/imported/2013/03/88.jpg

http://www.nissanpatrol.com.au/forums/images/imported/2013/03/89.jpg

Job Done
http://imageshack.us/a/img109/3262/sdg01472s.jpg

[NP99]

That's a good looking beast.

[Franki]

Nice write up.