Wanted an 8inch thermo fan

[maverick01]

I have a 10inch davies craig electric thermo fan that is in good working order but i just measured it and realised its too big for the job.

Im chasing an 8inch thermo fan in either a Davies Craig or Spal brand and must be in good working order.

It would be ideal if the fan was located in brisbane area. But i know we dont all live in a perfect world

PM me and i will contact you asap.

[threedogs]

Ive seen 9" and 7" on Ebay around $40 $50 mark never seen an 8" job

[maverick01]

Thanks mate.

[megatexture]

Repco can get 8" but they will have to order it in cant tell you the brand though

[maverick01]

Thanks guys. I will enquire at Repco tomorrow

[Sir Roofy]

Repco 8'' i paid $70 or 80 bucks for it blizzard i think its called
sitting in the shed made no difference

[04OFF]

Repco 8'' i paid $70 or 80 bucks for it blizzard i think its called
sitting in the shed made no difference

Maybe you have it around the wrong way ? (hahahah)

[maverick01]

What is everyone's opinion on installing a fan on the intercooller. Does it make a noticeable difference up hills.

[the evil twin]

I run a 9 inch puller and it makes bugger all difference at speeds above about 50 K's.

Slogging in low range with high engine loads yes, it helps and also if you pull up at lights or are idling after a hill climb when out playing it brings the EGT's down quicker FWIW

I highly recommend a puller rather than top mount but if you do top mount then put a screen over it so bits of gravel, twigs etc don't get flung into the cooler fins at mach 3 from the fan blades

[the evil twin]

Oops... double post... sorry

[Tvan]

got one brand new Davies craig 8 inch as seen on ebay..54951254

[maverick01]

Are you interested in swapping it mate.