PDA

View Full Version : ARB commercial bullbar + Alloy Hawse



Cuppa
16th February 2013, 06:42 PM
Does anyone have the above combination? What Hawse did you fit? Any issues?

threedogs
16th February 2013, 06:56 PM
Got a Marks adaptor hawse fairlead sitting here doing nothing

MudRunnerTD
16th February 2013, 09:50 PM
they all fit as they are designed forthe standard bolt pattern

Cuppa
16th February 2013, 10:34 PM
Got a Marks adaptor hawse fairlead sitting here doing nothing

PM sent thanks TD

megatexture
17th February 2013, 01:15 AM
The only other thing I noticed when replacing mine was some have an offset for the bolts, can't say I've ever seen them being used so not sure if its needed for a high mount or diffrent bar

Winnie
17th February 2013, 02:01 AM
We put a roped winch on my brother in laws GQ last weekend. Put the alloy hawse in the standard ARB bulbar and it was so far down it looked ridiculous. He got an offset hawse and is much better.

Cuppa
17th February 2013, 09:50 AM
Can anyone tell from the attached pics whether I'd need a 'standard' or offset hawse?
Or can I only tell by removing the rollers first? To remove the rollers is it just a matter of undoing the two bolts , one on either side, or are there other hidden ones anywhere?

ARB steel Bullbar (are they essentially the same design for all vehicles?)

Plasnart
17th February 2013, 10:08 AM
Just the 2 bolts cuppa. Should pull straight out after removing them. Not sure about arb bars.