PDA

View Full Version : Legals for changing tyre / wheel size nsw



Steve4wdin
13th February 2013, 09:57 PM
I have had a quick look in the search but can't find the answer. Are you allowed to change rim / wheel size? I thought a max of 50mm increase in wheel diameter was legal, but I checked the RTA web site and it states a max / min of 15mm. Any ideas? I have 17" alloys and want to change to 16" rims and 33" tyres. Legal or not?
Steve

Alitis007
13th February 2013, 10:47 PM
In VIC i know for a fact you can change your rim 1" bigger or smaller and 1" wider or thinner, as for tyres i think if it doesn't rub or stick out the past the body as a protrusion and its rolling distance doesn't change the speedo by more then 3% its fine

Steve4wdin
14th February 2013, 07:10 AM
I was always under the impression you could have 2" suspension lift, a 2"body lift and increase diameter of tyres by 2" and that was legal. Now theres this +/- 15mm thing. Can any one shed some light???

Alitis007
14th February 2013, 07:19 AM
An inch is 25mm mate

Steve4wdin
14th February 2013, 07:29 AM
An inch is 25mm mate

25.4mm =1" I am aware. 15mm =is just under 5/8th"

Maxhead
14th February 2013, 07:29 AM
upto 50mm ilift is legal. Be it tyre, suspension or body lift. I think the laws changed again just recently but this has always been the case.

Bloodyaussie
14th February 2013, 07:36 AM
Where is that info sheet that Winnie posted????

Has all the legals for all states of Oz.

Jacket_1985
24th March 2013, 08:39 AM
You want to be legal? easy! put the same tyres back on it.

If you want to bend the rules, go 33's.

if you carry a "spirit of the law" attitude, go 37's, and modify your car accordingly so its safe.

Maxgq
27th March 2013, 01:54 PM
so none of our cars are legal? right haha

healy
27th March 2013, 07:08 PM
VicRoads' new VSI 8 regulation permits "Owner Certified" 4WD ride height increases up to 75mm, with 50mm maximum allowed for suspension lift, plus a 25mm increase resulting from fitment of a tyre with 50mm greater outside diameter, provided the modifications are undertaken using a commercially available lift kit that has been specially designed and tested for the vehicle application. Under the national guidelines, 'Owner Certified' lifts are limited to 50mm.