Wine_maker
22nd January 2013, 02:48 PM
This is very interesting mount system for front view camera that I found somewhere in internet.
So this is our starting materials.
The carcam and standard mount system for wind shield.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24870
and we need 2 small but powerful magnets that we cant find in broken HDD from your computer.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24871
then we should grind down the mount hooks on the main mount system.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24872
Then we cut off the power line to carcam and plump the + and - feed wires to the magnets
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24873
then glue them to the main mount system like this:
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24874
On the small fixing plate that fixed on camera we also glue 2 metal plates for magnets and also plumbs feeds wire on it.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24875
then we fix the cam into small plate insert feed wire to the cam and just fix it on magnets.
So no need to tinker with wires when mount/unmount your carcam, plus you are insure against braking of plastic hooks also you mount and unmount cam by single move of one hand.
So this is our starting materials.
The carcam and standard mount system for wind shield.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24870
and we need 2 small but powerful magnets that we cant find in broken HDD from your computer.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24871
then we should grind down the mount hooks on the main mount system.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24872
Then we cut off the power line to carcam and plump the + and - feed wires to the magnets
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24873
then glue them to the main mount system like this:
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24874
On the small fixing plate that fixed on camera we also glue 2 metal plates for magnets and also plumbs feeds wire on it.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=24875
then we fix the cam into small plate insert feed wire to the cam and just fix it on magnets.
So no need to tinker with wires when mount/unmount your carcam, plus you are insure against braking of plastic hooks also you mount and unmount cam by single move of one hand.