PDA

View Full Version : Repower



Dmwlking
1st September 2012, 10:48 AM
Does any know of a nissan being repowered with a cummins. if so How did go and the cost.

Clunk
1st September 2012, 12:26 PM
There is / was a member on here who I believe used to fit them for a living, can't remember if was into patrols though and pretty exy too I think, if its the same as the brunswicks, around the 20k mark

tricksgonefishing
17th September 2012, 10:22 PM
I remember when I owned a boat with a cummins in it, the Kalgoolie cummins agent drove a GQ ute with a 6BT in it and it flew. They brought down my 855NT on a trailer (over3.5T) and had no trouble doing 160km/hr. If there is a conversion bellhousing I would like to know too.

healy
17th September 2012, 10:25 PM
Sounds interesting this one

nissannewby
18th September 2012, 06:11 AM
Have a look for the 6BT forum plenty of conversions on there with plenty of info

Dmwlking
18th September 2012, 10:29 AM
i got a bell housing for the f 250 to suit c6 auto.

threedogs
18th September 2012, 10:53 AM
That Kalgoolie ute rings a bell, there are a few members in Kal so maybe they might be able to point you in the right direction