GU driving lights

[nomadTech87]

Got a set of the roolite xxx driving lights. Knocked up a little lighting control box with parts from Jaycar and a bit of angle bracket.

Parts used: -sealed ABS enclosure
- 30 Amp relay
- relay socket
- SPDT 3 position switch (plan to later add fog lights, the switch will then select between
driving/none/fog)
- 2 waterproof cable glands
- a few metres of 20amp pvc insulated cable. Each light draws about 10 amps but 20amp
cable keeps the resistance right down
- leftover speaker wire for the switch to relay.
- fuse socket
- 20A fuse
- cut piece of angle bracket
- solder lugs
- heatshrink
- terminal block
- 2 x 6mm screws. There are two tapped holes in the engine bay near the brake booster,
this seemed the perfect spot to mount the control box.

http://img515.imageshack.us/img515/6339/20120605132502.jpg
http://img443.imageshack.us/img443/3093/20120605165031.jpg
http://img404.imageshack.us/img404/327/20120606085844.jpg
http://img253.imageshack.us/img253/4980/20120606112352.jpg
http://img850.imageshack.us/img850/3054/20120606143616.jpg
http://img14.imageshack.us/img14/7452/20120606204801.jpg
http://img17.imageshack.us/img17/2310/20120606204949.jpg
http://img845.imageshack.us/img845/9367/20120607130900.jpg