PDA

View Full Version : goodyear wrangler mtz with kevlar



Malgreen
1st July 2012, 11:16 AM
Ok guys i have bought a set of these tyres and my question is about the pressure they should be at, i just checked mine after the 50km check of wheel nuts and checked the pressure and was surprised to find the pressure at 44.5 ( warm) psi, i was a bit surprised by this and i will ring the tyre shop on Monday about this but thought i would put it to you guys first,, so what ya reckon???
and if this is the correct pressure what would i drop to in sand etc??
cheers

CorbinsGUte
1st July 2012, 01:52 PM
Hey mate i got a set of wrangler duratracs on my ute and on road i run 40 psi , about 24 off road and bout18- 20 on sand, because then if you run into trouble in the sand you can drop psi more to say 12 to get you unstuck .
Cheers

Sent from my GT-I9100 using Tapatalk 2

growler2058
1st July 2012, 02:15 PM
Search the 4psi rule link and have a read. I'm on tappachat so can't cut n paste sorry
My MTZ are run at 36 on road and as soon as I'm out playing I start at 18


---
I am here: http://tapatalk.com/map.php?u0kuil
Tap, Tap, Tap, Tap, what's that freakin noise?!

nissannewby
1st July 2012, 03:40 PM
44 is probably a little high. x2 on growlers for comfort and wear usually around the 36-38 psi mark.

TimGU
15th July 2012, 06:57 AM
I run 38 to 40 psi on road and 28 to 30 on corrugated dirt roads. This seems to work well for my 33" mtr.