GQ Hi/Low shifter mod, for body lift & crossmember drop

[SiRGsR]

Cutting the floor of your truck to accomodate your shifter will let heat and water/mud into the car, so when i dropped my crossmember it was needed or it wouldn't engage 4LO. I thought I'd share my modification for my HI/LO shifter for anyone to see.
You can always heat the shifter and bend it but since I have body lift and crossmember drop (SWB) I wanted to raise it and correct it cause I think it looks crap squashed in the boot..
A very easy DIY as most of you will know ;)

Ugly squashed boot
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_0912.jpg

Stick out
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1185_2.jpg

Cut your lengths and mark your cut
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1189_2.jpg

Cut a matching angle
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1190_2.jpg

Tac it in place and head to the truck to see if it is the right spot, u will need to reposition it a couple of times..
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1195_2.jpg

Finish your welds and clean it up
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1201_2.jpg

Undercoat and paint
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1206_2.jpg

Install and enjoy..
http://i1056.photobucket.com/albums/t370/SiRGsR/IMG_1211_2.jpg

[Bigrig]

Top job mate and thanks for posting it up!!!